Search:

I would do 4:88's same money better performance, so what you have to drive a little slower until you get the 37's. No brainer, just my 2 cents!!!!!!

There's really no way of telling from truck to truck. But all I can say is I have the MS2's in 285/70/17 8 ply with forged centerline wheels and average 15.5 to 16.5 around town country roads stop...

It should be an 8.5" 10 bolt rear housing, I don't think they make a 10.5".

I got my ventvisors, rear fender liners and mud guards on plus got it cleaned up too.

3599335994359953599635997

I'm from Watauga Tn. between Johnson City and Elizabethton and 15 miles from Bristol race track or Thunder Valley.

That my sister still has her life under control, and that Jesus Christ died on the cross for my sins.
I couldn't make it one day without him in my life!!!!!!!

I would say go to the D rated tire which is 8 ply instead of E rated 10 ply. I had an 05 2500 D Max and run 285/75/16's and just went down a little in air pressure. I think I did around 50 or so in...

I really can't say the leveling kit has hurt it in any way but these 8 ply tires going from the P-265 factory ones sure are Firm!!!!!!

Here's my 2011 Silverado, 3" front and 1 1/5 rear leveling kit, powder coated CenterLines with 285/70/17 LTX M/S 2's. I also have the new inTune.



35192351933519435195

A small of the back works great for small to medium frame auto's and you can get right or left hand draw's. They also cover good with just an oversize T-Shirt.
I carry a North American Arms 22 Mag 5...

My 2011 5.3, 6 sp auto with 3.42 gears, just under 3K on the miles. I buy the same gas every time before leveling and 285's I was getting around 13.5 and after the 285's I get around 15.5 this is...

No I haven't cut them, just got it done Friday and it never see's off road.
I've run several sets of these earlier model tires with great results, 55/65K and these M&S 2's have a 70K tread wear on...

+ 3 in the front and + 1 1/2 in the rear. I still don't like the rear as high as it is but they did not offer a rear 1 inch.

Thanks LURCH!!!!

Well I got my leveling kit and wheels and tires on.


3461434615346163461734618

Bump TTT!!!!!!!!!

I have a 2002 5.3 GMC 4X4 Truck engine for sale. The engine had 277,664.0 miles on it when I pulled it out and was running fine, I just found a real low mile junk yard engine to replace it with. The...

I HAD A 2007 HD RoadGlide but had to sell it, to many broken bones.32657

I have a 2009 SRT8 Challenger.32658




I also have a 2001 Yamaha G-20 custom golf cart that I use as a pit cart and...

Always I was a Truck driver for 27 years. I even back into the garage. I have one of the new Challengers, can you say blind spot trying to back out of any type space. You just have more control over...

I was thinking .007/.009 and I agree on the pinion depth.

LTX M/S 2's 285/70/17's

If the fuel filter has been changed at regular interval's say ever 10K you should not have those problems.

1st answer, Yes you need to have it realigned.
2nd answer, you need to be on a level surface and measure from the ground to the bottom of fender well opening. Then jack the front up to where it is...

It's really a 1975 with a lot of other parts on it.

Bump for flatbed build.

As to Powder Coating rim's I have a set of CenterLine's that were polished and I let them go last winter and didn't clean them enough. Anyway it pitted and ruined them. I have checked with 2 places...