Type: Posts; User: stevekarns
Search: Search took 0.00 seconds.
08-22-2012, 02:22 PM
There is a mark on the balancer and a tab on the engine to set the timing. I did some searching and found the details for setting the timing. I was dumb enough to fall for the 9 in a triangle...
08-22-2012, 09:10 AM
The computer on this truck is mounted on the drivers fender, on the BLUE connector I found a wire that is tan with a black stripe, is that the correct wire?
08-20-2012, 07:59 PM
Well it wasn't the filter, only, after replacing the filter I checked the pressure and still about 55psi. So I sprung for the pump and the pressure took about 3 turns of the key to get the fuel...
08-20-2012, 09:18 AM
One thing I'm not afraid of is some work, to help figure something out. I understand your thought process and will be adding it to my to do list. Thanks again for helping out.
08-20-2012, 09:01 AM
Thanks for the tips with the fuel pressure. I'll look into it and report my findings.
I was thinking about pulling off the upper intake manifold again, and taking the injectors out of the...
08-20-2012, 12:43 AM
I'm a Marine in Southern CA. My Buddy's wife called me up and said she's having trouble with her husbands truck who is in Afghanistan. Of course I wanna help. I'm usually pretty handy and can...
I had my truck get stuck in 4 Hi. It was a speed sensor on the transmission that was disconnected some how. Perhaps your speed sensor is faulty?
Usually I don't have to much trouble fixing automobiles, but I've got a real head ache on my hands. I'll post and see if I can get some good suggestions to help out. I'm a Marine, of 15 years. I'm...
Results 1 to 8 of 9