Search:

On an '04, it is probably inside the door, usually they are mounted on the door mechanical assembly behind the outside handle.

It sounds like you are activating the "exit" feature.

No truck info, so I can not help with de-activating it.

OK, so what j cat is trying to tell you, if the engine can be turned by hand, it is not preventing the starter from spinning. If the starter will not spin on it's own, and if the bendix solenoid does...

I was using the door switches as just one example, for the contacts that are in them. The contacts in the seat switches, on the side of the seat are also a probably area. What I was trying to say,...

Hey, welcome from New Brunswick. Maine is a great state, we drive through it a lot, going somewhere else, haha. But, we do love the beaches below Portland.

No, haha, I looked it up in my owner's manual, it's a different year, but it should work the same. I'll see if I can find a copy of yours.


OK, here is a copy of your manual...

Haha, I looked it up for you today. You need to hold the LOCK switch on the door and push the UNLOCK twice on the key FOB remote.

I was driving behind a 2500 this morning, both mirrors appear to be square to the perpendicular.

I now think the driver's side is good and the passenger side is top in and needs to be turned out,...

Pikey, swap my name for yours and my list would be similar; but like Surreal, I'd have to add @GMCerica, because, well, she's a girl with a gun, haha, and we need to get her back on here. She left a...

I can't tell which is wrong, I think it's the driver's side. But, I'm with Sierraowner5.3 I think one side is not quite in place.

But it can be turned off. My doors lock when I push the lock button and do not lock if I close the door. It's one of the options on the DIC.

Btw Vanessa, leaving the key all the way in the...

Of course it won't, what was I drinking? Thanks Pikey.

Here is a GM site where registration is not required, you can download the manual

http://www.gm.ca/gm/english/owner_centre/chevrolet/resources/manuals

It's the Canadian site, but the manuals...

We had someone with that question awhile back, he tried as you suggested Pikey, and I don't recall if it started. It seems to my old and broken memory that it did not start.

Pikey, I'm sitting here shaking my head, but I'm going to try it. I have a little hang on my throttle, I lift my foot to come to a stop and the drive by wire won't let the rpms drop off like they use...

I'm thinking a drain hole in the right rear door, letting the door fill with water.

It's a simple circuit, so I am going to ask some dumb ass questions.

- how do you know all fuses are good?
- how do you know the pump relay is good?
- how do you know (other than what you said...

With the tank dropped, you must have plugged the wiring connectors together to power the pump.

Do you have a meter, you need to check the connector to see if there is 12v on the pump lead.

With...

Missed that, sorry.

Maybe glass is jammed, maybe motor is seized. Maybe a button problem.

Can you operate the other window(s) from the driver's door?

Sometimes, you can see the leak if you follow the AC lines.

After you charged the system, did you see any puddles on the floor/ground?

What kind of vehicle are we fixing, does it have a rear...

I agree, the brushed aluminum looks very nice (want a second set of wood, haha)

I doubt if they are related.

A common problem with the wiring in the driver's door, is the movement at the door hinge. The constant flexing of the wires will cause the odd one to break inside the...

If the battery/alternator voltage is normal, a dirty connection will not increase the brightness of the lamp. However, the bright one may be normal and the dull one may be a result of a dirty...

You sound like your agreeing with me, yet you use an unproven "additive"

The refiners could produce gasoline with a little more "oil" (heavy distillates). The gasoline of old is refined to remove...

This is an old controversy, I saw a lot of words on your reference, but no data to support the claims.