Type: Posts; User: SuperSport01
Search: Search took 0.07 seconds.
Either one you want. MSD is good stuff. Ive had tons of items from them over the years and only had a few go bad... some of which they covered and fixed/replaced.
02-17-2012, 02:22 PM
So replacing the fuel filter and removing the filter housing for cleaning every oil change (3000miles) isnt enough? Not to mention cleaning my stainless mesh pre lift pump filter? As I said should I...
02-17-2012, 02:37 AM
Vortec L31 iron heads tend to run out of breath at around 6500 rpm but have great low-midrange power. With a mild 383 you will easily be able to take advantage of their flow up to 6000rpm. The fast...
Tire wear is relative to quality of lowering kit and wheel alignment. Ride height has nothing to do with tire wear.
02-16-2012, 01:31 PM
We should copywrite everything to the point that if China build something remotely close to what we have they have to pay us royalties. That and we should make them pay taxes on anything they ship...
02-16-2012, 12:49 PM
Yes I got rid of it. If I should ever get a water in fuel all I have to do is crack open the AN line fitting. I wanted to get rid of all rubber line in the fuel system after having it leak several...
The 2500 keys will fit but they wont lift the 1500. 1500 keys will lift a 2500 though. For cheap torsion keys on the 1500 you can use 99-03 F150 torsion keys.
02-16-2012, 12:15 AM
My Heath PMD relo kit has been installed since around 2000. Before that my 95 had 4 pmd replacements. I have 7 psi at all times at the filter housing. Only because factory items failed over time I...
02-16-2012, 12:01 AM
The 04 Regency I had didnt have electric fans. My buddys 05 z71 doesnt have electric fans. My 06 had them. Weird thing about drive by wire, it isnt on 4.3 trucks all the way up to 07.
02-14-2012, 11:39 PM
I just had another thought. Since its an 03 it didnt come with electric fans like the 06+ trucks do. A set of electric fans will free up power and mileage.
02-14-2012, 11:36 PM
No problem I have had a 6.5td truck for several years now and have learned what works.
^That may be true for some but it works fine for me. I like the fact that I'll never have to install another vacuum pump or boost solenoid.
02-14-2012, 03:44 PM
If your crossover pipe measures 2.5" its not stock. If your downpipe measures 3" its not stock either. Diamond Eye is a nice exhaust just make sure to get the kit with a muffler.
I would delete the vaccum pump and boost solenoid, and install a Heath turbo master wastegate controller.
02-14-2012, 03:23 PM
If the PMD hasnt been relocated out of the engine bay that should be the first mod. Heath Diesel has the nicest PMD relocation kit and a warranty. The next mod should be a turbo back exhaust such as...
02-14-2012, 03:15 PM
I would use long tube headers with an off road xpipe. For mufflers some Borla XR1 race bullets and then the tips ran out whereever you like. Or you can go to Kooks in Mooresville and they can build...
02-14-2012, 03:10 PM
A programmer can help slightly and you can use it to correct for the larger tires. But a real dyno tune will be much more optimized and the dyno tuner can do many more things than a simple plug in...
02-14-2012, 03:04 PM
I used a heat gun and fishing line to get the moldings off. Then the heat gun and a plastic spatula to roll the 3m tape off. Then I used gasoline instead of goo gone to wipe off the remaining sticky....
Results 1 to 18 of 18