Results 71 to 80 of 110
Thread: Leaking... again...
10-15-2012, 03:19 PM #71
Self reflection and help needed lots of it.
I was totally serious on the offer. I don't have anymore time to work on the truck this week or weekend. I just want it fixed and idk what to do.
Here's a list of what needs to be done:
Reinstall transmission all the way its close to all the way but not quite.
Reinstall oil pan and new gasket.
Reattach/torque front axle bolts.
Install filter adapter + gaskets and filter .
Install torque converter shield.
Install alternator, battery and air cleaner.
Put in oil and run truck to make sure it is all good.
Reinstall skid plates splash guard and other guards and covers that were removed.
All bolts are nice and organized and clean. Not a single Piece is missing to my knowledge.
If you wanna make extra money you can do the rear main as well I'll tack on another $100+ for your troubles.
If you wanna make the money or help me just PM me about it. At this point I can't even look at the truck it makes me too angry.
Btw question is it bad if the cold is causing slight condensation in the crankcase? Because if yes then what should I do about it.
Please even if you don't help physically I need the help emotionally because I'm just shot. I've wasted two day on moving the tranny and then learned that I couldn't get on the flywheel bolts. This wasted time could've been spent on the paperwork for my eagle project so I can get it done because I'm running out of time.
Even if someone knows a mechanic that will come to my house or that wont mind me towing it to them and will be reasonable on price. I beg of you all please look at this post and try to help me out. I love that truck and don't want it to just sit in my garage all winter because I can't fix it because then it will be ruined and most likely will never run. This beast is my dream truck and I stupidly tried to do something without the right tools and enough knowledge and I got far, but just still didn't do what I wanted and wasted so much time. Almost 20 hours of my time working was a waste because I needed the right tools and didn't ask for help. I admit I ****ed up, but I've learned a lot and know what to do next time. Only good thing that has come of this was I learned I'm strong enough to move a 350+lb transmission and transfer case with only my arms and legs lifting it. There was a lot of other things I learned, but that was just an awesome moment.
Wow, felt good to just say it out. But yah this truck not working has caused me to miss my girlfriends band competition, a day spend with her, possible getting my eagle, countless time that could've been spent making money or doing homework, and time that wouldn't of been wasted because I don't have a vehicle.
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
10-15-2012, 07:38 PM #72
Well, I know how ya feel man, Ive been in your situation more than once. Sometimes biting off more than you can chew to save a few bucks. I will tell you that I do most of my own work but when it comes to removing transmissions I let the equipped shops take care of it and just bend over the counter and pay the bill. If I were you at this point I would just call a tow truck and have it taken to a shop and have it done. Since you already have the driveshaft out it shouldnt be a problem having towed there. Most shops dont like things already taken apart but any experienced mechanic will be able to put yours back. At least when you get it back it will be done and done right and you shouldnt have to worry about leaking oil getting worse ect. Might set you back some greenbacks but when its just sitting there its not doing ya any good either. Maybe get a triple A membership and then have it towed. Anyways good luck and hope your back and running soon.
2011 Silverado CrewCab 5.3L*Ram Air Look Cowl Induction Reflexxion Hood*6" Pro Comp Lift*Flowmaster Dual exhaust*Perfect Launch Rear Diff. Cover*Led Smoke Taillights*L.E.D.Smoke 3rd Brakelight*60" L.E.D. Tailgate Bar*Rearview Mirror Reverse Camera and Sensors*Smoke Headlight Covers*Front Bumper Grill Insert*Deezee Black Alum. Diamond Rail covers*20" Ultra Motorsports Rims wrapped with 35.5"B.F. Goodrich Tires*Inchannel Raingaurds*CAI*Bullydog GT Tuner*Alpine Amp*Boss 6x9's*Boston Acoustic Subs*Terrantula Tweeters*Custom Sub box*Red Led Interior Accents*5% Ultimacool duo tint rear window and doors, 20% front doors*Custom Vinyl Graphics*Demolded*Debadged*Painted drums and calipers*
Future Mods Include: Custom Interior Hydrographics, Electronic Rollup Toneau Cover, 4.56 Gears, Painted rear bumper
10-15-2012, 07:49 PM #73
Already have AAA and the rear drive shaft was reattached yesterday. I just hate that I'm gonna look stupid to any shop. Might talk to @Enkeiavalanche and ask him if he can explain my situation to the shop he knows by me.
10-15-2012, 08:13 PM #74
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Done sent Mark a Mesg at Dr Nicks Trans in Milford.....Ask for Mark08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
10-15-2012, 08:17 PM #75
10-16-2012, 03:58 PM #76
Unless you are a total Gomer Pyle and don't have anything in your social world going on, it is hard to do this kind of project unless you have garage space to store the project while life goes on. When I was younger and out of college, I rented a garage from an older lady and restored a car in there. Glad I did that because money kept me from finishing the car for a few years.
This is why I pay the big bucks to the pros now. Fortunately I have people I trust either who are clients or are people I have done business with and found them to be very knowledgable, and I have only those folks do my automotive work. I have a guy who only works on European cars and some Japanese high end cars to work on my BMW and Infiniti, and I have two places that work on my truck, and an auto electric expert to do the electrical stuff. Everything gets done right the first time and if something is wrong they fix it.1994 Chevy K2500 Silverado, 454 (modified), original owner.
And other vehicles and toys.
"...If you can meet with triumph and disaster
And treat those two imposters just the same;
...you'll be a Man, my son!" Rudyard Kipling
10-16-2012, 04:21 PM #77
@The Heater I'm lucky that at least I have the garage space and usually I'm free, but this is one of my weeks where to even do laundry or relax I have to stay up to 12:00 because I have so much going on and it's leading all the way through the weekend. The good thing is that I have learned from this experience and now know what equipment I might want to save up for so I am better prepared next time I need to do a major repair. What really sucked about it all was I knew what I was doing, just didn't have all the right tools to get it done and that wasted a lot of time.
Shopping list before next major repair/project:
2 sets of jackstands at least 3 ton
New jack that I can trust and doesn't lose pressure
Ryobi ONE+ impact wrench
Two breaker bars one 18" another longer
Compleat adapter set
6 point deep well sockets for metric (had to buy the SAE already) for 1/2"
Same but for both for the 3/8"
Standard depth 6 point for SAE and metric both 3/8" and 1/2"
More extensions and better U-joints
More socket rails to organize it all and another tool box
Way in the future tools:
Other cool stuff
10-16-2012, 04:48 PM #78
Well, you have your Christmas and birthday list set for the next 5 years.
I know we can't recommend or advertise places on forums, but if you PM me I can give you some links to tool companies I have bought most of my tools from over the years with good results and pricing.
I would start with your sockets and wrenches you need, along with the wobblies (universals) you said you needed.
I have had to use a transmission jack. Thought long and hard about buying one. Decided that it would not pay to get one when I can rent one for a lot less, based on how often it would be used, how much it costs to buy one, and the space it would take up in my workshop.
Four post lift is great idea. Great to store that extra car or work on something. One word of warning. Do not buy one unless you have sufficient ceiling height. I have a lift, and my ceiling height is 15 feet inside and I would not get a lift with less than 15 feet interior height. Otherwise your lift and car storage options are dramatically reduced.
Lincoln and OTC make very good jacks. OTC makes a nice low profile two ton aluminum jack you can buy at certain on line sellers with two aluminum jack stands. I am going to buy that set in the near future. I have a Lincoln two ton jack (made in USA) that takes very few strokes to get the car up, but it is all steel, heavy and not a low profile so it won't work on my BMW.
10-16-2012, 05:16 PM #79
Sent the PM.
10-16-2012, 08:49 PM #80
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Did Mark get intouch with you? I will be at OCC in NY Sunday if you get it fixed in time come'on out and meet...
By bowtie11 in forum General Chevy & GM Tech QuestionsReplies: 7Last: 11-12-2011, 07:39 PM
By dcriffle in forum GM PowertrainReplies: 7Last: 02-10-2010, 02:42 PM
By IThurstSObad in forum General Chevy & GM Tech QuestionsReplies: 5Last: 09-07-2009, 09:36 AM
By dutzowmo in forum General Chevy & GM Tech QuestionsReplies: 1Last: 01-20-2009, 03:18 PM
By 95CTburb19 in forum GM PowertrainReplies: 4Last: 01-31-2008, 06:33 PM
Tags for this Thread