Results 1 to 2 of 2
Thread: 350 engine with 5 speed
09-27-2012, 10:46 PM #1
- Join Date
- Sep 2012
350 engine with 5 speed
i have a 79 chevy truck with a 350 and a 14 bolt rear end i need a 5 speed trany with a t-case used any ideas??
09-28-2012, 01:33 PM #2
The tranny you want is the NV4500. It was used in 3/4 and 1 tons starting in 1988. I have seen a few 1/2 tons with this tranny but most have a light duty 5 speed you want to avoid. Just look for a 5 speed with a granny low 1st gear, no low first gear, skip it. The strongest transfercase would be a NP205 with a passenger side drop,but finding one that would bolt to a NV4500 without using expensive adapters would be almost impossible. They where only used in 1988-91 1 ton crewcabs. There's not much of a chance finding one in a salvage yard. I would look for a NV/NP 241 passenger side drop transfercase from a 1988-91 Suburban or Blazer. You will have to swap the input gear from 27 spline to 32 spline, but its a easy swap and the gears are available from Advance Adapters or Novak.
97 Chevrolet Suburban K1500 5.7L
78 GMC High Sierra K1500
Fat, drunk, and stupid is no way to go thru life.
By DoubleDD in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 13Last Post: 02-10-2012, 12:47 AM
By plowguy in forum Chevy C/K Truck ForumReplies: 1Last Post: 01-06-2012, 02:58 PM
Wanted to Buy Need an Engine speed sensor for 6.2/6.5LBy Joeairforce in forum General ClassifiedsReplies: 0Last Post: 01-03-2012, 09:24 AM
By MightyMax in forum General Chevy & GM Tech QuestionsReplies: 93Last Post: 09-17-2010, 11:13 PM
By gmc4life in forum GM PowertrainReplies: 7Last Post: 08-14-2007, 11:42 AM
Tags for this Thread