Results 1 to 3 of 3
Thread: Wire Help for pending install
10-02-2012, 01:25 AM #1
Wire Help for pending install
I am about to upgrade the system in my truck. I have ordered the speakers JL Audio C5-650 and C5-650x along with a JL Audio XD700/5 that should be here by the end of the week. While I was looking around trying to figure out what and how much wire I was going to need to install this stuff I came across a thread from zigger about a big 3 up grade. I had heard of it before but not familar with the pro's of such a change. Since I need to order some good size wire for the amp install I figured I would also order some for the big 3. That brings me to my question. 1. Should I go with a "box" install kit? 2. If not how much and what size wire do I need to complete this. 3. Also what type/kind of terminals should I get to complete the both jobs? Thanks in advance for any and all replies.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
10-02-2012, 03:01 AM #2
Terminals are a matter of preference. Some people want cutsey digital voltmeters at the terminals for competition while others just want terminals that work and still others want multiple connection points on the terminals. Select what you like for the battery terminals.
As for the 'big 3', it's a worthwhile upgrade if you're pushing larger amounts of current than your key OEM wires (those being: alternator to battery, engine to battery, and battery to chassis frame) can support. I upsized my alternator and was adding a winch, so my cable is all 1/0AWG to support the >=300amp draw the winch is capable of creating. 1/0AWG would be overkill for just the amp, IMHO. However, a number of people do report brighter headlights and the like after doing a big 3 upgrade.
If you're interested in doing the 'big 3' upgrade give me a shout on the mobile and we can discuss it.
10-02-2012, 05:50 AM #3
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
As said above With a JL Amp they like to see a good ground and power all around so the current stays the same and you get the power going and leaving the amp. 4Ga will be fine all around.
I always just bought wire by it self and got the Terms I needed, What you may want to do is get what they call 9 cond wire too it's a single cable with 9 wires inside of it run that between your amp and the radio for your speaker wires. hook them up to your factory wires. Unless you want to run all new wires to all your speakers But be careful getting new wire into the door boots can be a pain...08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
By Mike TattooMan Burton in forum Chevy C/K Truck ForumReplies: 8Last: 10-29-2011, 01:53 PM
By JLNelsen in forum General Chevy & GM Tech QuestionsReplies: 6Last: 01-18-2011, 07:12 AM
By MWright936 in forum Performance & FuelReplies: 7Last: 12-05-2010, 08:09 PM
By L0sts0ul in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last: 06-26-2009, 10:30 PM
By vncj96 in forum The Coffee Shop ~ Chit ChatReplies: 0Last: 06-20-2009, 10:55 AM
Tags for this Thread