Results 1 to 7 of 7
10-07-2012, 10:58 AM #1
Anybody have any ideas of whats good to dry a black vehicle with after washing it. Just bout the truck and dont want to use anything thats going to scratch it.
10-07-2012, 11:12 AM #2
I have a sop vac that the top part comes off and can be used as a blower so I usually use it on my grille area other wise it always leaks out on the bumper, don't see why that wouldn't work. My wife had also picked up the Mr Clean nozzle that has a filter or something that eliminates the water spots so I don't have to dry!Finally a signature and Avatar! I also posted some pics in the Gallery.
2011 2500HD Crew Cab 4X4 Z71 6Liter.
2011 Outback Travel Trailer 260FL
So Happy to not be on the edge of GVWR Over Load!!
10-07-2012, 11:16 AM #3
Somebody mentioned a California Blade but im not not sure about it. seems like it may scratch it the paint.
10-07-2012, 11:31 AM #4
Last edited by 99'HEARTBEAT; 10-07-2012 at 01:46 PM. Reason: Added Infor.
5.3 l 3.73 l G80
BLACK BEAR CUSTOM TUNE
SNUGTOP l COLORMATCH l KATZKIN
10-08-2012, 11:01 AM #5
A leather chamois has always been the de-facto material for drying any vehicle.
I am very lucky, our water is very soft and just letting it air dry works very well for me.Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
10-08-2012, 12:35 PM #6
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
Drive it down the highway about 75 to get most of the water off, then come back and wipe it down with a chamois... I use a synthetic one. I also have a silicone blade that I have never used..."It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
10-14-2012, 09:58 AM #7
black is tough to keep looking good. I use micro fiber towels. I just drag across the surface light pressure.
wet the towels first this softens the fiber.
you need lots of polish to get the surface smooth as a mirror. then wax.
black gets very hot in the sun , the wax will vaporize quickly , so you need to do this often on surfaces on top that get blasted by the heat.
My other vehicle is white. the complete opposite. very easy to clean. wax and finish last look better much longer.
By LOVINTHESTORM in forum Detailing & Truck CareReplies: 3Last Post: 05-10-2012, 09:35 PM
By Cheez in forum Photo & Video GalleryReplies: 9Last Post: 03-28-2011, 05:35 PM
By bamf_shadow in forum Chevy Truck AccessoriesReplies: 2Last Post: 04-10-2010, 08:48 PM
By ejj in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 09-18-2009, 04:29 PM
By Ohio Tahoe in forum Chevy Truck AccessoriesReplies: 1Last Post: 06-09-2009, 07:00 PM
Tags for this Thread