GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1

    Default '89 V2500 6.2L Suburban

    Gonna sell my '89 Suburban. It seats 9 with the 3rd row seat, interior is in excellent condition only needing the headliner replaced.

    The body has about 141k miles on it. It's a N/A 6.2L and has a 4L80E trans swapped in, the speedo converted to an electric one, and the cruise control converted from vac to electric. It has an NP241 t-case, 10bolt front, 14BFF rear with 3.73 gears. Tires were just a few months old when I bought it and still look almost new. Runs great and should run better after I replace the temp switch in the trans in the next couple weeks.

    I've done the big rust repair work on it already but it does need a little more done. It still needs the rear wheel wells replaced/repaired, has a couple small holes over the rear wheels where the trim normally covers, has a couple small holes in the rocker panels under the doors, but nothing major. Has already had the tail-pan support replaced, as well as the piece in front of both rear wheels and the entire left rear lower quarter panel. Welds have not been completely smoothed and filled yet cuz I was waiting until I was ready to do them all at once.

    I have a fairly large pile of spare parts I will include with it as well including a complete (less glass) tailgate that is even the same color, rear bumper, 2 tailgate window motors/regulators, 1 manual tailgate window regulator (original one that came one it, I converted it to power), complete set of injector lines, roof console I haven't gotten around to installing yet, 2 spare gauge clusters, 6.5 front bumper I was thinking bout modifying to fit, 6.5L centermount turbo engine (complete less IP), dual stat crossover, a couple spare vac pods, 2 serp belt vac pumps, spare GR 28MT starter, spare set of wheel covers (no holes for front hubs though), RWAL (rear wheel anti-lock) module I was going to swap on (wiring is done just needs MC and plumbed in), set of front inner wheel wells (that I haven't gotten around to swapping in yet), and more that I can't think of right now.

    Would like $5k for everything or $3k for just the burb.





    Lots more pics available on request.
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  2. #2

    Default

    Price isn't firm
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  3. #3

    Default

    Come on.. I know someone wants this... Just filled it back up so it's got a full tank of diesel right now... Ready to go 500-600 miles at least on the hwy...
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  4. #4

    Default

    Need this sold.... Found the car I want to replace it with and need the money before someone else buys it before me.....
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  5. #5

    Default

    Offers?

    Should I list the parts pile separate?
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  6. #6

    Default

    Bump..... I'll include the few parts to finish up some of the unfinished ideas for it I had, with the burb at no extra cost... (front inner fenders, RWAL, power mirrors, overhead console, spare tailgate if wanted)
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  7. #7

    Default

    bump to the top
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  8. #8

    Default

    Still for sale
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

  9. #9

    Default

    still forsale? what is your bottom dollar for the truck?

  10. #10

    Default

    Quote Originally Posted by Magoogle View Post
    still forsale? what is your bottom dollar for the truck?
    I want $3k for the burb itself.
    Joseph


    Airforce Veteran (7 years)


    NRA Life Member

Page 1 of 2 12 LastLast

Similar Threads

  1. Can't find an original steering arm for a 1990 Suburban V2500 4x4
    By aldenflint in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 3
    Last Post: 01-27-2012, 08:07 PM
  2. 1990 gmc v2500 4x4 headlights making my truck die!
    By 1990gmcbeast in forum Chevy Truck Talk & News
    Replies: 0
    Last Post: 10-13-2011, 11:47 PM
  3. 1990 V2500 Suburban - running way too rich
    By Boldt in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 12
    Last Post: 02-21-2011, 06:08 AM
  4. 1990 V2500 Suburban
    By The Burbs in forum Member Introductions
    Replies: 7
    Last Post: 09-24-2009, 09:49 PM
  5. Location of ECM in '90 V2500 Suburban
    By Boldt in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 08-28-2009, 08:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •