GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24
  1. #11

    Default

    Well, I did some thinking about it and I went and sat in that truck again. I've got mixed thoughts about this.

    Why I want a lower trim level
    First off, I'm looking for a lower trim level, this is so I can add accessories myself. I'll talk about this in the other thread I started on this topic.

    Reasons For NOT wanting a floor-shift 4WD.
    Really, 95% of the time I do not need 4WD. When I need it will be 1) bad weather, 2) when I start to look for land out of the city to build a homestead on, 3) going on vacation up in the mountains a couple of weeks each year, 4) we plan on getting into more stuff next year like camping, boating, etc. That will take me to places off the beaten path more. So, the idea of a push-button or rotational-dial 4WD 4x4 selector means that I get that floorspace back.

    Reasons For wanting the floor-shift 4WD.
    Well, just because it is manual and if I do decide to do more off-roading in the future ... which may be a real possibility, then I'll just have to reach down and throw it into gear. I've read antidotes from people on both sides of the issues on this so there can be failure in both systems, but they're rare in post-2001 Silverados. However, there are less parts and electronic components that can possibly fail with a manual system.

    Thoughts on upgrading later?
    In theory, if I got a less-expensive and less-equipped truck, say a WT work truck with all power options except for the 4WD selector. Wouldn't you think that if leg and foot space really did become an issue that I would be able to buy the parts to turn it into an electronic 4WD system? I'll check with my people at the GM Dealerships that I go to ... and I could be hopelessly naive on this, maybe it takes a module or controller upgrade, I don't know. Essentially they're the same systems except there is a solenoid system that is activated by the dial (and a module I'm sure) that will control the transfer between 2WD N 4HI and 4LO.

    Steve
    10 Chevy Traverse LT AWD
    02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
    99 Chevy Cavalier LS (105K+ miles - commuter car)
    78 Chevy Suburban Silverado (454, 3/4 ton)
    62 GMC 3/4 ton Pickup (350 police interceptor)

    Remember: Search Before Posting | Fill out Your Profile & Signature
    Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
    Support GMTC: Help the site, contribute today

  2. #12

    Default

    I may be wrong, but aren't the electric shift transfer cases all Auto-Trac cases, and the manual shift cases are part-time.

    97 Chevrolet Suburban K1500 5.7L
    78 GMC High Sierra K1500
    Fat, drunk, and stupid is no way to go thru life.

  3. #13

    Default

    When I put my truck into 4x I don't hear anything. I knew it was in casue I was on the beach and punched it both front and back dug.





    2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18

  4. #14

    Default

    Could be, I'd like to learn more on this. I just asked a contact i have who runs a GM parts department said he has no idea ...

    Edit: typos
    Last edited by Steve; 10-11-2012 at 08:50 PM.

    Steve
    10 Chevy Traverse LT AWD
    02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
    99 Chevy Cavalier LS (105K+ miles - commuter car)
    78 Chevy Suburban Silverado (454, 3/4 ton)
    62 GMC 3/4 ton Pickup (350 police interceptor)

    Remember: Search Before Posting | Fill out Your Profile & Signature
    Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
    Support GMTC: Help the site, contribute today

  5. #15

    Default

    Quote Originally Posted by Steve View Post
    Could be, I'd like to learn more on this. I just asked a contact i have who ruins a GM parts department said he ha no idea ...
    How does he ruin it???That was kind of a funny mistype.




    2011 Silverado CrewCab 5.3L*Ram Air Look Cowl Induction Reflexxion Hood*6" Pro Comp Lift*Flowmaster Dual exhaust*Perfect Launch Rear Diff. Cover*Led Smoke Taillights*L.E.D.Smoke 3rd Brakelight*60" L.E.D. Tailgate Bar*Rearview Mirror Reverse Camera and Sensors*Smoke Headlight Covers*Front Bumper Grill Insert*Deezee Black Alum. Diamond Rail covers*20" Ultra Motorsports Rims wrapped with 35.5"B.F. Goodrich Tires*Inchannel Raingaurds*CAI*Bullydog GT Tuner*Alpine Amp*Boss 6x9's*Boston Acoustic Subs*Terrantula Tweeters*Custom Sub box*Red Led Interior Accents*5% Ultimacool duo tint rear window and doors, 20% front doors*Custom Vinyl Graphics*Demolded*Debadged*Painted drums and calipers*
    Future Mods Include: Custom Interior Hydrographics, Electronic Rollup Toneau Cover, 4.56 Gears, Painted rear bumper

  6. #16

    Default

    Quote Originally Posted by SurrealOne View Post
    It's totally a matter of preference. Some people feel that you gain reliability out of the stick -- which is true in a sense because you're mechanically engaging the t-case instead of pushing a button and relying on wiring and a shift motor to do it. Thus, there's less to go wrong.

    Unfortunately that's seldom the failure point. More common is a failure to engage the front diff ... which is electronically actuated in both the stick and push-button systems. It could be a sensor failing to signal the actuator or the actuator, itself. You get the idea ... it's a common point of failure for both systems.

    So it boils down to whether you want a stick or push-button system. It may also boil down to resale implications, as the stick is usually found ont WT's and LS's whereas the push button is found on the higher trim levels that tend to hold higher values.

    I personally wouldn't let it be a deal breaker if I liked everything else about the truck, but that's me.
    I have replaced shift solenoids on 3 different trucks and a switch on another one this year.
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  7. #17

    Default

    Quote Originally Posted by moogvo View Post
    I have replaced shift solenoids on 3 different trucks and a switch on another one this year.
    You've seen more fail in one year than I've seen fail in a lifetime. Yikes!

  8. #18

    Default

    I've had both electrically switched and lever actuated, cant say one has left me stranded more than the other. I do prefer a lever though, nothing says low four wheel drive better than shifting the lever and hearing the gears engage.
    Now if they'd just come back with locking hubs too.
    On newer trucks swapping from lever actuated to electrically switched isnt as easy as putting in the switch's, it's a transfer case swap along with having the computer programmed and a few additional servo's and wiring. About 2 days labor all together.
    The final drive gear ratio on the two cases is slightly different too, so you have to take that in account also.

    One other issue with the electrically actuated case is if you ever decided to build an extreme off-road truck you cant use any of the doubler or expander T-cases on the electrical switched case, theres compatibility issues and you need to swap to a lever actuated case to do that.

    Not that you'd ever think of selling your truck but one with an electrically switched case has a little better resale and is easier to get rid of, people have gotten lazy and dont like to reach down and shift anymore.

  9. #19

    Default

    I won't buy ANYTHING with "Feminine Four Wheel Drive" unless it is SOOO cheap that I can't pass it up!
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  10. #20

    Default

    I prefer the Stick over the electronic. I do like the 4 auto, that was nice when i had it. I miss the center console though, because of the stick.

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 09-13-2012, 06:40 PM
  2. push button 4x4 doesn't work
    By superUPer in forum General Chevy & GM Tech Questions
    Replies: 1
    Last Post: 12-01-2010, 03:51 PM
  3. 4wd push button doesn't light up
    By badbrad in forum GM Powertrain
    Replies: 2
    Last Post: 11-23-2010, 09:04 PM
  4. no power to push button 4wd
    By dcjones13 in forum GM Powertrain
    Replies: 9
    Last Post: 01-09-2009, 10:17 PM
  5. Push Button
    By EagleTalons in forum Audio, Video & Gadget Tech
    Replies: 5
    Last Post: 11-17-2008, 05:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •