Results 1 to 10 of 13
Thread: water spots?
10-14-2012, 07:13 PM #1
How do you remove water spots from windows and windshield?2003 Avalanche 4x4 with cladding 110k miles +, K&N stock replacement air filter, Skyjacker 8000 shocks, Hawks LTS pads, Summit Racing brand drilled and sloted rotors, Sylvania ZXE high & low beams, leveling kit, 285/70/r17 Michelin M/S
10-14-2012, 08:03 PM #2
10-18-2012, 05:41 PM #3
- Join Date
- Oct 2012
There are a couple ways to go about removing hard water spots from your windshield. Sure, you can polish those away with some sort of Swirl and Haze Remover. You can also, and I've had good results with this, use .0000 steel wool and some denatured alcohol. This method is for GLASS only.
10-19-2012, 01:06 AM #4
You can also use a detailing clay bar (and water). Do not rub hard.
Diamondite makes a kit for removal of stains from auto glass. Check them out. I have had good luck using just plain old white vinegar if the spots are not too old. If they are old, you are looking at some kind of mild abrasive. Like what Diamondite sells.1994 Chevy K2500 Silverado, 454 (modified), original owner.
And other vehicles and toys.
"...If you can meet with triumph and disaster
And treat those two imposters just the same;
...you'll be a Man, my son!" Rudyard Kipling
11-30-2012, 12:57 PM #5
Do you live in an area with real hard water? If yes, try a little bit of CLR on a cloth. Be careful not to get the CLR on your paint, and if you do you, rinse thoroughly and re-apply wax.
05-08-2013, 03:46 PM #6
i used the "softest" steel wool, and simple green, and just kinda polished the glass... then washed the whole truck... worked great!!Gas was $1.83 when Obama took office.....
05-08-2013, 05:10 PM #7
- Join Date
- Jan 2012
- New York
- Blog Entries
Prep-sol... stuffs awesome.2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..
Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.
05-29-2013, 11:00 AM #8
- Join Date
- May 2013
Quite a couple solutions to go in relation to removing hard water spots out of your windshield. Sure, you can certainly polish individuals away with getting some sort of Swirl along with haze eliminator. You may also and We have had achievement with this particular usage.
07-24-2013, 04:48 AM #9
- Join Date
- Jun 2013
- 1391 N Jefferson St., Anaheim CA 92807
Something simple would be mixing equal parts of distilled water & white vinegar.This mixture removes the water spot on the surface due to mineral deposit sitting on the surface. if you have etching below the surface then you will need a compound & a polish.
07-24-2013, 05:08 PM #10
RainX is the "Greatest" to repel water! JMHO2010 GMC SIERRA CREW CAB (Silver) 4x4, ReadyLift 2.5" Level Kit, 305/60/18 Dick Cepek Mud Country, Go Rhino Nerf Bars, Husky Liners front and rear, Bushwacker Bed Rail Caps, SCT Programmer.
By Steve in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 06-17-2010, 04:10 AM
By 09Z71 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 03-15-2010, 07:37 PM
By suburban2500 in forum Chevy Truck AccessoriesReplies: 12Last Post: 11-19-2009, 06:20 PM
By TahoeCrowe in forum Chevy Truck AccessoriesReplies: 1Last Post: 10-06-2008, 01:30 PM
By TxTazDad in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last Post: 05-22-2007, 09:39 PM
Tags for this Thread