Results 1 to 3 of 3
10-16-2012, 09:33 PM #1
- Join Date
- Oct 2012
- Northeast Ohio
Towing question with new 2500 HD 4x4
Just a question regarding towing with the 2500HD 4x4. I had a 2006 Dodge Cummins dually and never bothered with an equalizing hitch for my 24' toyhauler that weighs around 6.5k loaded. Would it be a good idea to use an equalizing hitch with the 2500HD? I am running the 6.0 standard bed with 3.73 gears. My guess is with the single rear wheels it would probably handle better with the equalizing hitch. If I go with that setup, any recommendations on brand?2013 Silverado 2500HD LT Std Bed 4x4, 6.0 Vortec, 3.73 axle, Graystone Metallic
10-17-2012, 06:00 PM #2
I think your right, the equalizing hitch would probably give you better handing. Rule of thumb, the tongue weight should be 10% of total weight, if so, you have 650 lbs on the ass end of the truck. That may be enough weight to over-squat the rear. Your probably on the border of needing one.Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
10-17-2012, 06:41 PM #3
So my travel trailer ways about 7500# and I use the Equalizer hitch with built in sway control. Like it and it works well... Good idea to use the weight distribution you distribute the weight more effectively across the front and rear axles of the truck. You could actually cause wearing of the front axle tires and cause feathering of the tires...
Speaking from experience!Finally a signature and Avatar! I also posted some pics in the Gallery.
2011 2500HD Crew Cab 4X4 Z71 6Liter.
2011 Outback Travel Trailer 260FL
So Happy to not be on the edge of GVWR Over Load!!
By Mike S. in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 3Last Post: 05-14-2010, 09:37 AM
By fd8215 in forum GM PowertrainReplies: 3Last Post: 05-08-2010, 08:19 PM
By R&S Spl. in forum General Chevy & GM Tech QuestionsReplies: 6Last Post: 04-09-2009, 08:54 AM
By mapper in forum Chevy Silverado Forum (GMC Sierra)Replies: 6Last Post: 03-29-2009, 11:34 PM
By Iluvmychevy in forum Towing & Trailer TechReplies: 6Last Post: 05-27-2008, 07:01 PM
Tags for this Thread