GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Heating Issues?????

    Help.....my 95 tahoe 4x4 will blow heat out of the floor and defog no matter where i select it to go. I checked the actuator by the gas pedal and it moves when i change the settings from floor to defog and then to vents and floor. It will NOT blow out of the vents its really faint coming out. It blows hard out of the floor and defog all the time. I had a bad blower motor and I replaced it...I also cleaned the debris out of the heater core(leaves n such). My heat is hot but I cant control the direction of the blow. There are 3 or 4 of these actuators Right? The blend air door will open and close without issue as well. PLEASE HELP. Michigan winter is almost here. Im tired of catching heat in the face while driving.
    "Off Road Beast In The Making"

  2. #2

    Default

    Quote Originally Posted by 95Tahoe View Post
    There are 3 or 4 of these actuators Right?
    Right, the one(s) causing your problem are called mode actuators.

    Some times, they fail to reset when the battery has been disconnected. I have been lucky, in the past, by trying a battery disconnect and letting them reset. Note: for me, they never reset on the first try, move the controls and retry.
    Ray

    '09 Avalanche LTZ - Black
    '05 Envoy XL (sold)

Similar Threads

  1. 2005 5.3 heating issues
    By silverado23 in forum GM Powertrain
    Replies: 2
    Last: 02-12-2012, 07:35 PM
  2. Over heating!help!
    By Edgar_505 in forum GM Powertrain
    Replies: 4
    Last: 07-26-2011, 05:35 PM
  3. Heating issues
    By joker_fly in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 4
    Last: 12-28-2009, 11:53 AM
  4. Heating oil for fuel
    By pontiac.79 in forum Performance & Fuel
    Replies: 5
    Last: 12-08-2008, 11:53 PM
  5. Heating and AC
    By ebollard in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 06-01-2008, 07:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •