Results 1 to 10 of 12
Thread: Trailer Brake Controller Problem
10-20-2012, 01:36 PM #1
Trailer Brake Controller Problem
I have a 2011 2500HD with LML. The 2500 includes trailer package. I also have a 24' enclosed car hauler trailer. I've pulled it a few times without incident. All of the lights and brakes worked just fine. Last Sunday, I discovered that my running lights weren't working. I discovered a blown fuse today but haven't figured out what caused the fuse to blow. That's a project for another day.
I also found last weekend (quite by surprise) that my brake controller isn't working anymore. I had it set on 6 and then 8 and then 10 and had no brakes at any setting. The trailer would stop the truck before when set to 6. Funny thing is that if I push the lever on the controller all the way to the left, I can feel the brakes trying to kick in. I haven't checked the fuse since it's a wierd shape and I didn't have a tool to pull it. What are your thoughts about the problem I'm having? Thanks for your feedback.
By RED Z71 in forum Towing & Trailer TechReplies: 4Last Post: 09-09-2012, 06:04 AM
By attaboy in forum Chevy C/K Truck ForumReplies: 1Last Post: 08-11-2011, 10:12 PM
By redsilverado1988 in forum Performance & FuelReplies: 1Last Post: 10-06-2010, 12:00 PM
By nhbowtie in forum Chevy Silverado Forum (GMC Sierra)Replies: 6Last Post: 04-17-2009, 10:11 PM
By GM_GURL in forum General Chevy & GM Tech QuestionsReplies: 11Last Post: 03-19-2009, 05:25 PM