Results 1 to 1 of 1
10-24-2012, 07:40 PM #1
- Join Date
- Feb 2012
- Woodstock, GA
- Blog Entries
My recent upgrades and future upgrades.
Okay so I've recently put a PowerAid throttler body spacer on my truck and a Volant cold air intake. Next I'm looking at a Diablo Trinity tune and a aftermarket cam shaft. I'm waiting to around Christmas to get the tuner but I was wondering if I put the cam on my truck before I got the tuner how would it run? Would the current computer fubar it up? Also the Trinity could go in and over ride my RPM limiter or O2 sensor's? If not what programer would be best for by passing current limits on my truck?
Any brands of cams I should go with?LB7|2" lift|20" rockstar xd's|wrangler mud tires|Leer cap|4in turboback|volant CIA|boost increase valve|EFI by DTS|phantom gauges|6 speed ZF-6|solid mass flywheel|ceramic Kevlar clutch|High idle switch|55 gallon in bed fueltank|Edge insight|4 rigid dually|app radio 2|250watt kicker amp an 10" sub
By chevy_truck_driver in forum Chevy C/K Truck ForumReplies: 8Last: 05-10-2012, 08:49 PM
By gmmechanic in forum Chevy Truck Talk & GM NewsReplies: 4Last: 05-07-2012, 09:13 PM
By mudking4717 in forum Performance & FuelReplies: 5Last: 09-29-2010, 08:43 AM
By RAYSRANDP in forum Member IntroductionsReplies: 6Last: 09-21-2010, 08:34 PM
By npverhey1 in forum Performance & FuelReplies: 7Last: 12-06-2008, 06:28 PM
Tags for this Thread