GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9
  1. #1

    Default Best Brand for Impact Adapters and Socket?

    Not too worried bout Impact rachets and guns at the moment because that could be a completely different thread, but if you want to mention impact guns and ratchets you have delt with that are workhorses, let me know.

    I am specifically looking at Impact Adapters, Extensions, and sockets. The big brands that come to mind are Craftsman, Ingersoll Rand, Northern Industrial, Alltrade, Kobalt, etc.

    Which ones are the best? Most of these are going to have a lifetime warranty anyway, but just wondering?

    And for the adapters, I have never heard of Neiki, or Tekton, etc but it looks like they are the only ones that make them.

  2. #2

    Default

    Believe it or not, the Harbor freight impact sockets and adapters are pretty robust. I have a set of Craftsman impact sockets that I got for super-cheap last Black Friday though. I still need to get some impact adapters and extensions. I've been using my regular ones and so far, they've held up. My 1/2 drive universal is a little worse for wear after running it on an impact at full articulation on it.
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  3. #3
    Jr. Apprentice
    Join Date
    Sep 2012
    Location
    Wilmington, DE
    Posts
    24
    Blog Entries
    1

    Default

    Quote Originally Posted by nakranij View Post
    Not too worried bout Impact rachets and guns at the moment because that could be a completely different thread, but if you want to mention impact guns and ratchets you have delt with that are workhorses, let me know.

    I am specifically looking at Impact Adapters, Extensions, and sockets. The big brands that come to mind are Craftsman, Ingersoll Rand, Northern Industrial, Alltrade, Kobalt, etc.

    Which ones are the best? Most of these are going to have a lifetime warranty anyway, but just wondering?

    And for the adapters, I have never heard of Neiki, or Tekton, etc but it looks like they are the only ones that make them.
    I'm sure like everyone, I have a "hodge podge" (uh yes I used that word!) of tools. In regards of the professional tools, I've always preferred Mac over Snap-On. Non-Professional (hardware store), I favor Kobalt over Craftsman. I know that Craftsman has a "professional" grade, but you have to order them. If you don't mind waiting you could go there, but it seems that the employees at the Sears stores to understand the warranties on their products (long story). I agree with Crawdaddy that you can get some decent sockets from Harbor Freight. That's where I got my 1/2" impact set and I use them for everything. I guess it pretty much depends on preference.

  4. #4

    Default

    Quote Originally Posted by Crawdaddy View Post
    Believe it or not, the Harbor freight impact sockets and adapters are pretty robust. I have a set of Craftsman impact sockets that I got for super-cheap last Black Friday though. I still need to get some impact adapters and extensions. I've been using my regular ones and so far, they've held up. My 1/2 drive universal is a little worse for wear after running it on an impact at full articulation on it.

    Completely Agree! I have had a set of the Harbor freight Pittsburgh impact sockets, extensions, and adapters for 11 years and never broken one. I have twisted off my 1/2" to 3/8" craftsman adapter 5 times in that time. So, I always end up using my harborfrieght cheapy and never had an issue. My dad has a set of pittsburgh that he bought somewhere else around 20 years ago and never broken one. I will not buy a ratchet or regular sockets from them (I will only buy craftsman or snapon), but impact sockets are fine and come with a lifetime warranty! Their breaker bars are crap though.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  5. #5
    Jr. Apprentice
    Join Date
    Sep 2012
    Location
    Wilmington, DE
    Posts
    24
    Blog Entries
    1

    Default

    Quote Originally Posted by Pikey View Post
    Completely Agree! I have had a set of the Harbor freight Pittsburgh impact sockets, extensions, and adapters for 11 years and never broken one. I have twisted off my 1/2" to 3/8" craftsman adapter 5 times in that time. So, I always end up using my harborfrieght cheapy and never had an issue. My dad has a set of pittsburgh that he bought somewhere else around 20 years ago and never broken one. I will not buy a ratchet or regular sockets from them (I will only buy craftsman or snapon), but impact sockets are fine and come with a lifetime warranty! Their breaker bars are crap though.
    I must be the lucky one, because all of my former co-workers (technicians) all said the same thing when I strolled into the shop with my breaker bar from HF. I figured I'd use it until it broke (if I didn't kill myself in the process of using it). I'd even use a cheater bar on it. It never bent or broke at the pins (where the cheap ones tend to break). I also have a Proto Tools breaker bar, but I don't like using that one because its kind of short. (I got that one from trade school)

  6. #6

    Default

    Mine always broke at the pin! I did use a cheater bar on it when I broke it. But, my craftsman stands up to a 6 ft cheater bar with no issue

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  7. #7

    Default

    one trick is to google harbor freight gems. its all the stuff harbor freight carries that is decent, rather then cheap junk.

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

  8. #8

    Default

    K-D, SK and Craftsman are what I buy and own. In over 30 years of owning sockets including impact sockets, I have had exactly ONE (Craftsman) non impact socket break and it was from too much torque placed on it with a breaker bar by someone bigger than me trying to use it to loosen a nut on a Case backhoe rear wheel. (he stood on the breaker bar).

    I buy K-D and SK at www.thetoolwarehouse.net (mostly, although there are a few other places I use too).

    I don't use any Harbor Freight sockets. Or wrenches. Reason is they basically are throw away quality and they have no warranty other than a basic consumer warranty such as if it breaks and a piece goes in your eye and you prove the product was defective. Harbor Freight is banking on you being too dumb to hire an attorney to sue them over it or that you will simply just go buy another one of their sockets and claim the medical on your insurance (if you have medical insurance). I am not disputing reports that they don't break or have suited the end user to their expectations, but I don't trust them and I don't want to get hurt from a POS tool breaking while I am using it. And I don't like buying stuff made in China.

    All my pneumatic tools are Ingersol Rand. Except two impact wrenches and a 3/8 inch air ratchet, which are Craftsman.
    1994 Chevy K2500 Silverado, 454 (modified), original owner.
    And other vehicles and toys.

    "...If you can meet with triumph and disaster
    And treat those two imposters just the same;
    ...you'll be a Man, my son!" Rudyard Kipling

  9. #9

    Default

    Won't have any of those real cheap impact tools in my box. They will break, they shatter & when they do the peices travel across the shop at 3X warp speed - voice of experience ! Threw the rest of the set in the scrap skip !! Had one Craftsman break on me, but being a decent socket , it split, but didn't shatter. Yes, had a problem with a replacement at sears, dim bulb salesman said i'd used it on an impact wrench, well, yes,- had to point out that it was a impact socket ! As far as quality tools, several have been mentioned, got lots of SK & proto myself, also Armstrong, williams and even Allen brand ( most of theirs are U.S. made ). One air wrench that hasn't been mentioned is Chicago Pneumatic, I have three, oldest one is +30 years, anvil worn out, very beat up, still use it sometimes. When it comes to impact sockets & etc, quality counts ! Ken

Similar Threads

  1. Neo Socket Scam or Real???
    By AL3X in forum Performance & Fuel
    Replies: 24
    Last Post: 10-02-2011, 04:53 PM
  2. Trailer wiring socket, already in harness.
    By bob s in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 01-03-2011, 02:52 PM
  3. Cv axle nut socket? 98 z71
    By Jcloud in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 07-24-2010, 09:54 PM
  4. What Size Socket For Hub Bearing Nut?
    By brtt485 in forum General Chevy & GM Tech Questions
    Replies: 2
    Last Post: 12-02-2009, 03:13 PM
  5. 7 pin socket replacement?
    By sgt_in_usaf in forum Audio, Video & Gadget Tech
    Replies: 3
    Last Post: 12-30-2007, 10:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •