Results 1 to 1 of 1
11-01-2012, 08:46 AM #1
- Join Date
- Dec 2010
Wiper blade Arms splined or not on inside, 2010 silverado??
2010 silverado. Just had a new windshield installed
After the work, i notice the wiper arm not sitting in the correct position. When i removed the arm to align it properly, I noticed a tappered shaft with splines, but it looks as if the inside of the arm itself where it mounts is not splined. Is this assumption correct?
Looks to me that i just align the arm where needed, then the splines 'dig in' as the nut is tightened on the taper shaft.
Is this correct, i don't want to wreck the splines if there are any, but it is hard to tell. ANyone have experience with this? I felt it with a screw driver, but it looks like an imprint mark only.
By jeff618 in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 10-27-2010, 05:23 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 08-20-2010, 07:00 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 07-20-2010, 11:20 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 07-11-2010, 09:40 AM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 05-18-2010, 08:10 PM
Tags for this Thread