GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 42
  1. #21

    Default

    your truck: 2002 bright ass red silverado

    engine size: Vortec 5.3l

    camshaft: Stock

    cylinder heads: Stock

    pullies: Stock

    intake system: Spectre Performance

    exhaust system: Flowmaster 40

    pcm modification: none

    Suspension : Stock

    Transmission : stock

    Exterior : Debadged and smoked tail lights, Kyle Busch trailer hitch cover

    Interior : GPS, Alpine head unit, Monster energy stains....
    www.myspace.com/teamimageracing
    www.myspace.com/brotherspolish

    2002 Silverado
    5.3L
    Corvette Servo
    Spectre Air Intake
    MSD 8.5mm Super Conductor Wires
    AC Delco Iridium Plugs
    Flowmaster 40 Series
    Alpine Head Unit
    Next Mods
    2" Lowering Shackles
    Loud Mouth Grill
    :gasp:

  2. #22

    Default

    There alot of nice sounding trucks on the forum


    SuperCharged 2006 Silverado SS 2WD

    For My Mod List go to my Profile then to MY GARAGE :great:
    http://www.gmtruckclub.com/forum/album.php?albumid=6

  3. #23

    Default

    your truck: 1975 Chevrolet Scottsdale (C-10) 2-wheel-drive long-bed. Blue and silver.

    engine size: Pre-1987 350

    camshaft: Speed-Pro CS-179R .447 Life (I & E) 291 degree duration

    cylinder heads: I honestly don't remember

    pullies: Whatever combo lined up with the others

    intake system: Edelbrock Performer RPM; Holly 750 vac secondary carb; K&N Filter; High-flow Fram fuel filter near fuel tank; Edelbrock mechanical fuel pump

    exhaust system: 1.75" Headman headers; Flowmaster mufflers; dual 2.5" exhaust with x-over tube;

    pcm modification: n/a

    Suspension : Lowered 3" front, 5" rear; Front dropped using springs and spindles; Rear dropped using spring hangers; Front anti-sway bar; Shocks;

    Transmission : TH-400 (From a 1968 Chevelle); Stage 2 shift kit; Aux cooler; B&M Mega-shifter

    Exterior : Paint; Mirrors; Tonneau; Misc. glass; Chrome tube grille; Sir Micheal's steel rear roll-pan; Euro-style taillight lenses; Gas cap from a friend's wrecked Mach I Mustang

    Interior : Fitting Auto-Meter gauges into the dash; grey carpet and blue/grey seat (Originally red); Custom, hand-painted faux-wood-grain dashboard; Misc cigarette burns;

  4. #24

    Default

    Quote Originally Posted by bzboardco View Post
    your truck: 2002 bright ass red silverado

    engine size: Vortec 5.3l

    camshaft: Stock

    cylinder heads: Stock

    pullies: Stock

    intake system: Spectre Performance

    exhaust system: Flowmaster 40

    pcm modification: none

    Suspension : Stock

    Transmission : stock

    Exterior : Debadged and smoked tail lights, Kyle Busch trailer hitch cover

    Interior : GPS, Alpine head unit, Monster energy stains....
    Is that a factory paint option?

  5. #25

    Default

    Colorado 2.5 turbo intercooled (Thai built)

    Piggy back race ECU

    Fuel pressure controller

    Turbo boost cut with manual adjust

    3” exhaust system with free flow box

    Quick spool race headers

    External waste gate

    350hp borg warner turbo with modified housing

    K&N cold air intake

    Large intercooler

    330mm vented floating discs

    Brembo 4 pot calipers

    GTR nissmo clutch

    Street/Race suspention kit

    Smart gauge set up

    Just order a carbon fibre bonnet

    Some of the parts aren’t on yet as the vehicle is still getting repaired after a nasty smash
    Expected to dyno at 300hp and 700nm Newton meters of torque .
    Cant wait to hit the strip against a few other diesels
    Last edited by Rigger; 01-25-2010 at 02:57 AM.
    ______________________________________
    2009 Colorado 2x4 2.5ltr diesel turbo intercooler
    Monster piggy back DSM, Turbo boost cut, manaul boost control, Fuel pressure controller, 2.5 " free flow exhuast system =
    200HP 400+ N/M of torq

  6. #26

    Default The Ghost

    truck: 2001 Chevrolet S10 LS

    engine size: stock 4 cylinder, soon to get modded internally

    intake system: custom shorty intake, soon to be true cold

    exhaust system: soon to get a flowmaster 40 muffler welded in

    pcm modification: looking at a Diablo tuner

    Exterior : rear window sticker, bed dent package (rare!)

    Interior : foot well lights, painted dash, sticker

    Can we make this into a sticky please?


  7. #27

    Default

    your truck: (1992 K1500

    engine size:5.7

    camshaft: (stock

    cylinder heads: (stock o

    pullies: (stock

    intake system: edelbrock 3502 mpfi system and airaid cai

    exhaust system: doug thorley tri wye headers, high flow cat, flowmaster

    pcm modification: custom tuned
    Suspension : (stock, how low or how high you have it )

    Transmission : (what did you do to your Tranns, if anything)

    Exterior : (what did you do to your truck)

    Interior :replaced the 60/40 bench with buckets
    92 K1500, edelbrock 3502 mpfi, doug thorley tri wye headers, blood enterprises custom tuned.

  8. #28

    Default

    Quote Originally Posted by Rigger View Post
    Colorado 2.5 turbo intercooled (Thai built)

    Piggy back race ECU

    Fuel pressure controller

    Turbo boost cut with manual adjust

    3” exhaust system with free flow box

    Quick spool race headers

    External waste gate

    350hp borg warner turbo with modified housing

    K&N cold air intake

    Large intercooler

    330mm vented floating discs

    Brembo 4 pot calipers

    GTR nissmo clutch

    Street/Race suspention kit

    Smart gauge set up

    Just order a carbon fibre bonnet

    Some of the parts aren’t on yet as the vehicle is still getting repaired after a nasty smash
    Expected to dyno at 300hp and 700nm Newton meters of torque .
    Cant wait to hit the strip against a few other diesels
    fibre? bonnet? Newton meter?? I LOVE you crazy Brits and your made-up words!

  9. #29
    Legend
    murdog94's Avatar
    Join Date
    Feb 2008
    Location
    Cloquet, Minnesota, United States
    Posts
    8,198
    Blog Entries
    12

    Default

    your truck: 1988 Silverado 2500(6lug) Ext Cab, Long Bed 4X4, Black

    engine size: 60K reman 350TBI, completely stock

    Suspension : Farctoy with coilover shocks in the rear

    Transmission : 5spd Manual

    Exterior : UWS Bedfloor toolbox, Custom Minnesota Weight reduction... 2007 Chevy Chrome clad rims/center caps, w/265/70/17 Bridgestone Dueler AT Revo2s.. Soon to come a 1995 GMC Grill and composite headlights

    Interior : Full 1992 Wiring harness with Tach Guage cluster, 1991 Cloth Door panels, 1994 Power bucket seats. 1992 Steering column, with Leather wrapped steering wheel. Redone headliner.
    Mike

    Currently

    1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).

    2009 Saturn Aura XE (wifes car)

    2011 F-150 Crew 4X4

    "Hold it to the floor till you see God.... Then Brake!!!!"

  10. #30

    Default

    Quote Originally Posted by roger97338 View Post
    fibre? bonnet? Newton meter?? I LOVE you crazy Brits and your made-up words!
    We don't make up words, we actually invented them!
    Adam


Page 3 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. Cheap way to gain 500 HP with one simple modification!@
    By Steve in forum Photo & Video Gallery
    Replies: 16
    Last Post: 06-10-2010, 07:17 PM
  2. frame bracket modification?
    By GunRock0811 in forum Lifted & Offroad Suspension
    Replies: 4
    Last Post: 03-31-2010, 10:23 AM
  3. Visual and Performance Modification Recommendations
    By Alaskan in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 2
    Last Post: 10-15-2009, 09:04 AM
  4. intake modification problem.
    By cascott325 in forum General Chevy & GM Tech Questions
    Replies: 17
    Last Post: 09-12-2008, 06:12 PM
  5. BEN'S RAM AIR BOX MODIFICATION [Expired Topic]
    By Dr_Zero in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 9
    Last Post: 04-07-2006, 11:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •