Results 1 to 2 of 2
11-12-2012, 08:48 PM #1
- Join Date
- Sep 2012
Too much positive camber on stock suspension
A few months ago I bought a fleet truck from a company for cheap. It has 270k miles but seemed to be maintained well and runs good. The positive camber was noticeable just by looking at the tires from the front of the vehicle.
The tires were severely worn on the outside edge so I decided to get new tires and have an alignment. The shop adjusted the camber as much as they could and they're still positive Passenger: .85 & Driver: 1.42. It's much better than before but still not close to specs.
The adjustments are turned up as much as possible. The ball joints have no play, all bushings are good, stock rims/tires and no known major wrecks.
The shocks have been changed but i don't know what else was changed.
Any idea how i could get the camber into spec? Lighter springs in the front, maybe??
11-12-2012, 09:36 PM #2
the alignment shop said that there wasnt anything wrong with it?1994 GMC Yukon, 2 door, Victory Red
Garage Link: http://www.gmtruckclub.com/forum/sho...1994-GMC-Yukon
By Falcone in forum Lifted & Offroad SuspensionReplies: 3Last: 04-03-2011, 04:15 PM
By spudmcspiff in forum Lifted & Offroad SuspensionReplies: 2Last: 08-30-2010, 06:45 PM
By mike1193 in forum Chevy C/K Truck ForumReplies: 3Last: 12-07-2009, 04:33 PM
By fx2offroad in forum General Chevy & GM Tech QuestionsReplies: 3Last: 10-06-2009, 01:47 PM
By coloradowillie in forum Chevy Colorado Forum (GMC Canyon)Replies: 2Last: 11-21-2006, 10:30 PM
Tags for this Thread