GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11

    Default

    Ya that is a really good price!
    1994 GMC Yukon, 2 door, Victory Red
    Garage Link: http://www.gmtruckclub.com/forum/sho...1994-GMC-Yukon

  2. #12

    Default

    I don't. I try to just find some good online deals.

    Speaking of online deals, anyone know of any online truck accessory sites who are having a Black Friday sale?
    WAR EAGLE!!!

  3. #13

    Default

    I'm at the ranch, planning on staying here through thanksgiving weekend, That places me 80mi. from the nearest "big Box". Thats barely far enough to avoid the insanity !!! Got a 6 Pack of Sam Adams and a few Bud Lights stached in the fridge and there will be lots of left over goodies too. Plan on spending most of "black" friday in the shop "tinkerin'" on my old Willys truck. Ken

  4. #14

    Default

    I ended up getting caught up in the event more than I originally wanted to. Sears did 2 waves of Doorbusters sales: one at 8pm and another at 4am. I went to the 8pm sale and the line was wrapped around the building. I did get in and snatch up the 26 piece wrench sets and a torque wrench I was after. However, the toolbox I wanted didn't go on sale until 4am. I went home for a very brief while, then turned around again and was at the store for 11pm figuring there would be another huge line around the store. Around midnight, I got in line and waited for 2 hours in the cold until store management brought us in around 2am. The line was relatively short, about 20 people. Then, I realized that the line was basically for the TVs on sale. So, I could have gone home after the 8am sale and rolled in around 4am to get the box, but at that point I just stayed till 4. But I got my $200 tool box!

    The box is a base-model box, but it's a decent starter box I can keep for a couple years until I can afford a nice box. I loaded it up Saturday and already have it about 50% full of tools, so I don't have a massive amount of room for expansion. I have pics of the box, but I'll have to upload them tonight when I get home.

    Was it worth staying out and around Sears for nearly 12 hours? .......... Yeah, I guess so.
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  5. #15

    Default

    My wife decided to try out the Black Friday thing at WalMart of all places for her first time. Needless to say she didn't stay gone long and only ended up bringing home a printer for the computer. Haha. I don't ever try to get out with all those folks. I'll just wait until a week or so after and catch the other sales. I might not save as much but it's not worth the couple extra dollars for me to get up that early or fight the crowds. Sears always has a lot of good deals on tools though. I need to swing by there and get some new inventory for the ol' toolbox.
    Josh
    Petal, MS
    2009 Chevrolet Silverado LTZ 4x4

  6. #16

    Default

    Here's a couple pictures of my box put in place and then loaded:

    Click image for larger version. 

Name:	IMG_0518.jpg 
Views:	32 
Size:	77.8 KB 
ID:	46322Click image for larger version. 

Name:	IMG_0519.jpg 
Views:	30 
Size:	83.8 KB 
ID:	46323Click image for larger version. 

Name:	IMG_0521.jpg 
Views:	35 
Size:	74.1 KB 
ID:	46324Click image for larger version. 

Name:	IMG_0522.jpg 
Views:	27 
Size:	82.1 KB 
ID:	46325
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  7. #17

    Default

    Man that looks good! I've got something similar but without the middle section. I wanted black but red was on sale when I got it a few years back. I need to get the other 3 drawers like you did so I can keep stocking.

  8. #18

    Default

    Quote Originally Posted by Crawdaddy View Post
    I ended up getting caught up in the event more than I originally wanted to. Sears did 2 waves of Doorbusters sales: one at 8pm and another at 4am. I went to the 8pm sale and the line was wrapped around the building. I did get in and snatch up the 26 piece wrench sets and a torque wrench I was after. However, the toolbox I wanted didn't go on sale until 4am. I went home for a very brief while, then turned around again and was at the store for 11pm figuring there would be another huge line around the store. Around midnight, I got in line and waited for 2 hours in the cold until store management brought us in around 2am. The line was relatively short, about 20 people. Then, I realized that the line was basically for the TVs on sale. So, I could have gone home after the 8am sale and rolled in around 4am to get the box, but at that point I just stayed till 4. But I got my $200 tool box!

    The box is a base-model box, but it's a decent starter box I can keep for a couple years until I can afford a nice box. I loaded it up Saturday and already have it about 50% full of tools, so I don't have a massive amount of room for expansion. I have pics of the box, but I'll have to upload them tonight when I get home.

    Was it worth staying out and around Sears for nearly 12 hours? .......... Yeah, I guess so.
    That's a nice box -- more than I'll need, really. I bought the same toolbox the Monday before Thanksgiving ... at the same price you did ... with no wait. How? I signed up for Shop My Way, online -- which has no cost to it and so far, no spam, either.

    For Shop My Way customers Sears started its Black Friday event the Sunday before Thanksgiving at 5pm Eastern. You could log in, print out a coupon code (actually three -- one for each section) for the toolbox you bought, and take it to the store in advance of the Black Friday sale.

    It was kinda cool doing my Black Friday shopping on Monday with no people or lines around.


    I also took advantage of 5% sale prices and a 10% coupon (total 15% discount) and free shipping from kbcarstuff.com -- where I ordered my Rigid lighting.

  9. #19

    Default

    Yeah, I saw your post about it. However, I generally dislike the ideas of signing up for that kind of stuff because while they may not send you spam now, I can guarantee they will in the future. I also didn't have the time or vehicle to fit it in without going through extra trouble during the week. I lost several hours of my life and sleep to it, but I'll live.

    As for the box, it's nice for the price, but it's really a very bottom-end box in terms of quality and features. The ad claimed it was a ball bearing box, but it has the standard friction slides and also doesn't have the griplatch feature. It'll hold me over for 2-3 years until I can afford the box I want.
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  10. #20

    Default

    Quote Originally Posted by Crawdaddy View Post
    Yeah, I saw your post about it. However, I generally dislike the ideas of signing up for that kind of stuff because while they may not send you spam now, I can guarantee they will in the future.
    I have been a member of their program for a few years now. (Since they bought Kmart) I never get emails from them except for my digital receipt when I purchase something. Which is nice because I would rather have an e-copy than try to keep a bunch of them stored somewhere

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Found this Black Friday HID kit deal 50% off
    By fan123 in forum Chevy Parts eBay
    Replies: 1
    Last Post: 11-27-2011, 03:19 PM
  2. Black Friday Hauls
    By Crawdaddy in forum The Coffee Shop ~ Chit Chat
    Replies: 8
    Last Post: 11-26-2011, 12:49 PM
  3. Black Friday Truck Accessories Shopping
    By Steve in forum General Classifieds
    Replies: 2
    Last Post: 11-24-2011, 09:16 PM
  4. Going to look at this friday
    By lancer in forum Photo & Video Gallery
    Replies: 7
    Last Post: 10-20-2010, 04:32 PM
  5. Black Friday Shopping!
    By Steve in forum The Coffee Shop ~ Chit Chat
    Replies: 28
    Last Post: 11-30-2008, 02:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •