GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1
    Sr. Apprentice
    Join Date
    Feb 2009
    Palmerston, Ontario, Canada

    Default G2 Bakflip Tonneau Cover, NEED HELP!!

    Hey guys,

    I recently bought a slightly used G2 Bakflip tonneau cover for my truck which has the factory GM bed rail protectors. I was told that the tonneau cover will work with the bed rail protectors. I've seen lots of trucks with protectors and the tonneau cover but I can't get my rails for the tonneau to clamp even and level. I have the shims on but the rail wants to tilt in towards the box when I go to tighten the clamps...

    Any help would be awesome!!
    2012 Chevrolet Silverado RCSB WT 2WD 1SA
    4.8 | G80 | 3.23 | Convenience Package | Z82 | Z85 | B30 | Victory Red

  2. #2
    Sr. Mechanic
    Join Date
    Oct 2011
    Salt Lake City, UT


    I have the same cover on my 2011. They do tilt in a little bit. I would say if you feel it's excessive then another shim is in order. You can make some out of wood.

Similar Threads

  1. Replies: 0
    Last: 11-21-2012, 11:40 PM
  2. Replies: 0
    Last: 10-10-2012, 03:20 PM
  3. Bakflip Taneau cover F1 with built in ladder rack
    By parts bot in forum Chevy Parts eBay
    Replies: 0
    Last: 09-22-2012, 04:00 AM
  4. Replies: 0
    Last: 04-06-2012, 01:54 PM
  5. BAK BAKFlip G2 Hard tonneau cover and other recommendations
    By COFLH in forum Chevy Truck Tech Forum
    Replies: 2
    Last: 03-08-2012, 10:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts