Results 1 to 2 of 2
11-22-2012, 08:43 PM #1
- Join Date
- Feb 2009
- Palmerston, Ontario, Canada
G2 Bakflip Tonneau Cover, NEED HELP!!
I recently bought a slightly used G2 Bakflip tonneau cover for my truck which has the factory GM bed rail protectors. I was told that the tonneau cover will work with the bed rail protectors. I've seen lots of trucks with protectors and the tonneau cover but I can't get my rails for the tonneau to clamp even and level. I have the shims on but the rail wants to tilt in towards the box when I go to tighten the clamps...
Any help would be awesome!!2012 Chevrolet Silverado RCSB WT 2WD 1SA
4.8 | G80 | 3.23 | Convenience Package | Z82 | Z85 | B30 | Victory Red
11-24-2012, 09:39 PM #2
I have the same cover on my 2011. They do tilt in a little bit. I would say if you feel it's excessive then another shim is in order. You can make some out of wood.
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 11-21-2012, 11:40 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 10-10-2012, 03:20 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 09-22-2012, 04:00 AM
By AutoAnything in forum AutoAnythingReplies: 0Last Post: 04-06-2012, 01:54 PM
By COFLH in forum Chevy Truck Tech ForumReplies: 2Last Post: 03-08-2012, 10:39 AM
Tags for this Thread