GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 LastLast
Results 1 to 10 of 58

Hybrid View

  1. #1

    Thumbs down Don't ya just hate that!

    Last tuesday night, on the way back from fire training, I went hunting. I got one too. Sadly, I was not wearing camo, sitting in a tree or carrying a gun. Don't ya just HATE when that happens!

    Click image for larger version. 

Name:	2012-11-21_11-49-54_123.jpg 
Views:	274 
Size:	65.6 KB 
ID:	46441

    Fortunateely, my insurance agent is a car guy and understands that to some guys, a car's value is not based on a book. I hope to have this taken care of within a week or two.
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  2. #2

    Default

    That sucks, glad that deer didnt jump up into your windshield and caused more trouble. I drive around during the day and I can tell where a deer has been hit due to the blood marks left on the pavement. But seriously I am a lot more cautious driving at night this time of year. I am sure you'll be happy when your truck is put back together.
    2002 Chevy Silverado & 1995 Ford Bronco

    02 Silverado: 50K miles, 20" Motto Rims, Flowmaster 50 Series
    95 Bronco: 160K miles, 4" Superlift, 33/12.5/15 Mickey Thompson
    01 Civic: 75K miles, DD
    -Erik



  3. #3

    Default

    I am eager to get started on it to be sure. I am going to do the work myself on this. The worst of it is a bend in the core support. I am going to try to straighten it out. Otherwise, I will order a new one from LMC (or some such vendor) I would rather keep the almost $1000.00 in labor in my pocket!

    I will be sure to take pics of the reconstruction.
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  4. #4

    Default

    That stinks, I am glad that you are ok. Looks like you may have gotten lucky. Is there any damage to the hood or fenders? Is it just bumper, grill, lights, core support? Did you keep the deer?

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  5. #5
    Legend


    Enkeiavalanche's Avatar
    Join Date
    Apr 2010
    Location
    Piermont,NY, back in Northern NJ now, But may be in IL soon....
    Posts
    5,321

    Default

    I had one of those Grills for the Longest time sitting in my Garage from my 98 Tahoe.. I think I sold it about 3 years ago... Glad to see your OK.. does not look that bad.. Keep us posted....
    08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X

  6. #6

    Default

    Only thing hurt was my pride... both when it happened and every time I have had to drive it since. There is no sheet metal damage. The core support is tweaked. I haven't seen where just yet, but once I get my parts together I will take it out if need be.

    Hey! On the bright side, I get a new grille without the chrome peeling off, clean new headlights and I am going to put a "diesel bumper" back on in place of the standard one. (For those who are unaware, the Diesel bumper is the one with the air holes on both sides of the license plate bracket.) They used them on some Tahoes for a while, using the holes to put in driving lights.
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  7. #7

    Default

    Not to bad, when I was young my grand parents had a 1966 GMC and they hit a deer. It tore up that truck! Don't know how fast they were going but as a child I was amazed at the damage. Could have been a lot worse!

  8. #8

    Default

    I am back on the road and happy to say that the truck is done... except maybe for a buffing job and I am thinking about putting a bull bar on the front...

    The truck is happy again and ready to go back to work!

    Click image for larger version. 

Name:	2012-12-15_13-57-45_745.jpg 
Views:	27 
Size:	78.3 KB 
ID:	47005Click image for larger version. 

Name:	2012-12-15_13-58-05_227.jpg 
Views:	27 
Size:	67.6 KB 
ID:	47006Click image for larger version. 

Name:	2012-12-15_14-01-41_998.jpg 
Views:	25 
Size:	77.8 KB 
ID:	47007Click image for larger version. 

Name:	2012-12-15_16-33-55_166.jpg 
Views:	26 
Size:	61.5 KB 
ID:	47008

    The last shot is of my buddy Abdul doing some detail work on the truck. He's AWESOME!
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  9. #9

    Default

    Shes looking good but didn't you forget to but the liscence plate braket back on??
    1994 GMC Yukon, 2 door, Victory Red
    Garage Link: http://www.gmtruckclub.com/forum/sho...1994-GMC-Yukon

  10. #10

    Default

    looks good moogvo!

    not sure how a bull bar would look on your truck tho. id have to see pictures.

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

Page 1 of 2 12 LastLast

Similar Threads

  1. I hate my gas gauge!
    By ChevyGirl95 in forum General Chevy & GM Tech Questions
    Replies: 4
    Last Post: 11-22-2010, 10:30 AM
  2. i hate punks!
    By sheep in forum Audio, Video & Gadget Tech
    Replies: 16
    Last Post: 10-30-2010, 11:44 PM
  3. I hate to ask this.
    By denn454 in forum Lifted & Offroad Suspension
    Replies: 1
    Last Post: 10-10-2010, 05:21 PM
  4. Why I hate sticks...
    By DirtDog in forum GM Powertrain
    Replies: 14
    Last Post: 06-18-2009, 03:26 AM
  5. I really hate this guy J/K
    By 84fiero123 in forum The Coffee Shop ~ Chit Chat
    Replies: 8
    Last Post: 03-17-2007, 05:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •