GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5

Hybrid View

  1. #1
    Sr. Apprentice
    Join Date
    Jul 2009
    Location
    Weatherford, TX
    Posts
    56

    Default Torque Convertor Not Locking Up 4l60e 95 K1500 sub

    Hey y'all, I've seen a few topics that address this in different ways but none with the same basic symptoms as mine...all shifts nice and firm, but absolutely no lockup.

    This is a used 4l60e with it's TC out of a mid 90's K1500 pickup. I just installed it as-is into my 95 K1500 Sub. All I did was replace front pump seal, change filter & fluid, & wash it off. Shifts great, but no lockup whatsoever.

    I checked all the electrical connections & read alot...so it looks like I need to plug up the scanner & make sure the PCM is sending a lockup command?

    And if it is, I need to replace the TCC Solenoid, right? Sounds easy enough...someone tell me if I'm wrong here... Please and thank you
    '95 1/2 ton Suburban 4wd 350, 140K, w/ tornado and k&n filter | everything else stock

    '89 1/2 ton Suburban 2wd 350, 200+K, completely stock except 31 x10.50 tires & 40 series flowmaster

    '85 1/2 ton Suburban 2wd 350, 250+K, burnt valve :lol: , edelbrock 50 carb, comp cam, silvolite pistons, HiPerf distributor, 18" glasspacks

  2. #2
    Sr. Apprentice
    Join Date
    Jul 2009
    Location
    Weatherford, TX
    Posts
    56

    Default

    Bumping this...upon further investigation:

    No transmission codes, no engine codes, PCM is sending Lockup command. Fluid level good, color nice & red & new smelling.

    Still great shifts...no lockup whatsoever. Help Please!!

    Any further thoughts?

  3. #3

    Default

    I'm drawing a blank here... Just replying so you don't start thinking that we are ignoring you! (plus a free bump-ola)
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  4. #4
    Sr. Engineer
    Join Date
    Oct 2010
    Location
    Indianapolis, In
    Posts
    493

    Default

    How does one tell whether the TC has locked up or not? For sure, without guessing.
    2000 GMC YUKON SLT, 5.3L tow pkg, G80 rear/w 3.73 gear

Similar Threads

  1. 1994 K1500 350 4l60e no 1st or 4th after rebuild
    By ssumners in forum GM Powertrain
    Replies: 3
    Last: 09-30-2012, 09:14 AM
  2. 4L60E Torque Converter Bolts
    By mhypertext in forum GM Powertrain
    Replies: 0
    Last: 02-12-2011, 10:11 PM
  3. Strange behavior with my locking rear on the '99 K1500
    By jn1965 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 0
    Last: 06-28-2010, 05:50 AM
  4. WTB: Torque Converter for '98 4L60E
    By mateospeed in forum General Classifieds
    Replies: 2
    Last: 04-01-2010, 09:17 AM
  5. 4L60E torque convertor shudder
    By inspectormatt in forum GM Powertrain
    Replies: 9
    Last: 04-19-2009, 01:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •