Results 1 to 5 of 5
12-01-2012, 12:54 AM #1
- Join Date
- Dec 2012
Tire Clearance W/Uncommon Lift Setup...
I have a 2010 silverado. I had a 3.75, 3.5 is what it may be called, rc suspension lift on 33in trail grapplers w/ 18 inch rim. I recently put a 3 inch zone body lift on and bought a set of 325/65/18 (35/12.50) fierce attitudes. I know my truck requires at least 6 inches of lift to clear 35s, this set-up should provide 6.5 but is there a difference between my set up and let's say a 6 inch procomp? I'd hate to put them on and them not fit. That was the main reason for the body lift.
12-01-2012, 03:05 AM #2
you will be fine with that setup the only difference is the pro comp is a full suspension lift.
Fabtech/Banks Ram Air |Fuel Off Road/ 315/70/17 duratracs |Hyper tech / Spencershids |Color Matched Bowtie |15% Tint on Front Windows|20% Tint on Back Windows
Chevy Ridin' High
"Black rims are as cool as a boner at a swim meet"
12-01-2012, 07:24 AM #3
Welcome to GMTC, glad to have ya.1994 GMC Yukon, 2 door, Victory Red
Garage Link: http://www.gmtruckclub.com/forum/sho...1994-GMC-Yukon
12-01-2012, 07:48 AM #4
- Join Date
- Feb 2010
- Lucedale, MS
- Blog Entries
Welcome to the club, it's good to have you aboard.
12-01-2012, 04:44 PM #5
By Pruett in forum Lifted & Offroad SuspensionReplies: 5Last Post: 11-15-2012, 09:21 PM
By chase87 in forum Wheels & TiresReplies: 6Last Post: 08-09-2011, 10:22 AM
By Steve in forum Tire RackReplies: 1Last Post: 02-28-2009, 07:55 PM
By rurdy in forum Member IntroductionsReplies: 1Last Post: 09-11-2008, 08:47 PM