Results 1 to 3 of 3
12-01-2012, 07:49 PM #1
update on power option issues...two down, two to go...
2001 silverado 1500 LT Z71 ex-cab stepside
with help from you guys, the tow/haul is now working, as are the power mirrors. thanks, everyone (j cat put in extra help, thanks)
still have no cruise control ("cruise" light goes on when button is pushed, but cruise does not engage), and no electronic 4x4 (dash icon does not light up, and 4wd is not engaging).
there are no brake issues I am aware of, no warning lights, etc. the brakes do need replacement, but still working, without excess wear.
i know the gm electronic 4wd has weak spots at the actuator and encoder, but I do not have a scanner, or the $ to go to GM to get it read so i can find out which it is. is one easier to change out than the other?
anymore help out there?
12-01-2012, 08:28 PM #2
Again, I don't know your truck, my last 2 trucks used a rotary switch to select 4x4, these switches often had dirty wipe contacts that could be cleaned, or, the switch could be replaced.
The TCCM tells the electro-mechanical parts to go into 4x4 mode, it then receives a signal(s) tell it that each part is in place. Perhaps one of the parts is not in place and therefore, not returning the "ready" signal.Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
12-02-2012, 08:36 AM #3
my guess is the ignition 1 fuse 10A is the problem. IGN 1 10A.
By MTM in forum GM PowertrainReplies: 9Last Post: 08-06-2011, 01:50 PM
By bartmk in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 09-28-2010, 07:21 PM
By ggaudet1 in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 07-17-2010, 12:07 PM
By onelove in forum GM Diesel & DuraMaxReplies: 16Last Post: 02-10-2010, 04:23 PM
By 78jeepstang in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last Post: 04-23-2007, 07:36 PM
Tags for this Thread