Results 1 to 6 of 6
Thread: My transmission is slipping...
12-24-2012, 09:43 AM #1
My transmission is slipping...
1999 'burb with 200k miles and the trans feels like it's slipping. Not a good sign, I assume?!?I like you.
12-24-2012, 09:58 AM #2
Ok, we need a little more info like your driving style, how often you change fluids, the transmission, if you have a cooling system and other info like that. Slipping usually is never a good thing, but the extent of how bad it is slipping determines how we fix it. I've only felt my tranny slip once or twice and doing a simple transmission flush and replacing the filter did the trick.
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
12-24-2012, 11:52 AM #3
I did a fluid and filter change 10k miles ago. The fluid still looks clean, doesn't smell burned. The truck is a 99 k1500 4x4 burb with the 5.7L in it. I spent the last month driving it pretty hard, since I had that bucking problem between 1 and 2k rpm... it might've hurt the trans. Now, it feels like a slipping clutch on a manual trans vehicle when I press the gas from a stop, then seems to "grab" firm around 2k rpm. I'm assuming that's because the torque converter is locking at that point?
12-24-2012, 12:09 PM #4
The bucking problem may have put some strain on the tranny. Personally I'm kinda tranny stupid I know what may cause problems and sorta why, but don't have much on fixing them... Do you have a tranny cooler? Also do u use the truck for towing? Since you live in Dallas the tranny has to reach high temps, the number one killer for transmissions is heat.
12-24-2012, 12:16 PM #5
No added coolers... just what the factory would've included. The heat hasn't been bad lately, so I doubt that's what did it in. I think i was the hard driving during my problem. I had to keep the rpm's above 2k for it to drive OK, so I'd manually shift it. I'd have to manually keep it in 2nd or 3rd, with consistent 3-4k rpms for extended time... but, the fluid still looks great inside. Oh well... at 200k miles, I'm sure a new trans was somewhere in its future!
12-24-2012, 12:30 PM #6
Yah the tranny isn't usually dealing with those rpms during normal driving. I say if you replace the tranny you should get a 4L65e which is a bit stronger than the 4L60e but uses the same exact connectors, pan, fittings and has the same dimensions.
By Jimzu in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last: 04-15-2012, 05:08 PM
By CoDaChrome in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last: 12-26-2011, 07:46 PM
By b_burdine in forum GM PowertrainReplies: 6Last: 01-02-2010, 02:44 AM
By b_burdine in forum GM PowertrainReplies: 0Last: 12-15-2009, 09:29 AM
By foxbmx in forum GM PowertrainReplies: 3Last: 03-18-2009, 10:29 AM
Tags for this Thread