Results 1 to 1 of 1
Thread: Fuel Filter plumbing
12-08-2012, 03:42 PM #1
Fuel Filter plumbing
GM in its infinite wisdom, put steel fittings on our lines for the frame mounted fuel filter....
they rusted, and stripped off in the filter's threads leaving a leak.
(if you every go to change your own fuel filter, do it with an EMPTY tank on an incline with the tank below the filter..... or you will take a gas shower)
So im wondering if i can now use an inline steel filter with 3/8 rubber hose.... its 1993 with tbi, so im assuming the fuel pressure is about 15psi?
i feel comfortable with that. but idk how much fuel pressure this pump can put out at red-line ( i like to do burnouts)
do any of you have a non-stock filter plumbed into your truck?
does anyone know the max fuel PSI of these trucks?
please help, i need this fixed this weekend.
- - - Updated - - -
nevermind! lol teflon tape fixed it =)
though this could easily be a big problem in the future or to many of you... so be careful when changing these. im gonna coat the fittings in grease so they dont rust anymoreGas was $1.83 when Obama took office.....
By pelletman in forum Chevy SUV & Crossover Tech ForumReplies: 1Last Post: 07-11-2012, 06:50 PM
By Silverado1500 in forum General Chevy & GM Tech QuestionsReplies: 6Last Post: 01-15-2010, 09:44 PM
By 2wheelmudder in forum Chevy C/K Truck ForumReplies: 3Last Post: 11-01-2009, 10:01 PM
By 178kchevy in forum Performance & FuelReplies: 6Last Post: 04-06-2009, 11:59 AM
By jnt412 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 01-06-2009, 10:28 PM
Tags for this Thread