GMTruckClub Window Decals

**Steve** · 02-03-2008, 05:11 PM

UPDATE: HERE IS THE LINK TO ORDER: http://www.gmtruckclub.com/forum/cartplog.php (with final price with shipping included)

I think this design works better. I can have them mass produced and ship them out for a lower rate too, probably $10 for a large one and $8 for two smaller ones.

Take a look at this:

I like this design becuase 1) it's easy to read, 2) it's eye-catching, 3) it gives some depth to your vehicle, like we're a real club with some real power behind us, 4) it just looks more appealing than the flat across the window sticker.

What does everyone think? (You have to be registered/logged in to see the images!)

w/o border

w border

**Crawdaddy** · 02-03-2008, 06:15 PM

I'm thinking I like the one without the border. I'm thinking I'm going to throw 2 of them on the sub, one on each of the large side rear windows in the lower back corner....classy

**MD4x4 Fireman** · 02-03-2008, 06:31 PM

i like it without the border. just let me know when to send $$$, where to send it, who to make out the check to.

**Dj Friction** · 02-03-2008, 06:34 PM

I like it with the border.............

Let us know when where and how much!!!!!!!

I'm ready!!!!

**95CTburb19** · 02-03-2008, 06:53 PM

I think they both look great! Is it actually a sticker with a white background or is it one of those that you put on then peal? If it's the second, would it be possible to get it in white?

**Dan** · 02-03-2008, 07:01 PM

either one in white lettering

**Steve** · 02-03-2008, 07:08 PM

The good part about this is that you can take off the border if you don't want it.

This will be a Vinyl cut-out, so it will be cut on a machine and the excess white vinyl will be cut-off. Then a piece of clear application tape is put on top.

To install:

Peel the backing off the vinyl lettering.
Make sure your window is clean.
Stick it onto your window.
Run the bubbles out with a squeege-roller.
Peel off the clear application tape
You're rolling with the GMTC flag!

**chevyjeffgordon** · 02-03-2008, 08:23 PM

I like with the boarder

**Duramax04** · 02-03-2008, 08:54 PM

I like either one but i done went and got myself confused.So the letters will be cut out and you will be sticking the white part on your window cause the black letters won`t show up on tinted windows or will the letters be white????