Results 1 to 2 of 2
Thread: Misfire confusion
12-11-2012, 12:43 PM #1
- Join Date
- Dec 2012
Got an 07 Classic 4.8L. Just hit 110K miles. Cylinder 7 misfire. Swapped spark plug wire. No change. New plug and igniter coil. No change. Also had an evap purge code come up. Does that usually cause a specific cylinder misfire? Any response would be helpful. Hoping its not injector or worse
12-11-2012, 06:48 PM #2
with that age mileage it can be dirty injector. check the fuel pressure with a gage see if the pressure is correct. get some techron injector cleaner see if the miss fires go.
if not then the compression testing on all then compare. could be head issues also.
By elwood in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 09-06-2012, 10:58 AM
By Big_Mike in forum The Coffee Shop ~ Chit ChatReplies: 0Last Post: 08-30-2012, 09:24 PM
By TBCCHEVY in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last Post: 11-29-2011, 09:28 AM
By drillbit26 in forum General Chevy & GM Tech QuestionsReplies: 9Last Post: 05-05-2011, 06:11 AM
By the new guy in forum Lifted & Offroad SuspensionReplies: 0Last Post: 01-29-2011, 10:24 PM
Tags for this Thread