Results 1 to 3 of 3
12-14-2012, 08:38 AM #1
Looks like I am going to need to replace at least 1 door blend actuator
Not a project I really wanted to deal with, but I knew it was going to happen sooner than later...... This morning it was 28 degrees outside and frost on the windows, and even after 20 minutes, I am getting maybe air at 60 degrees out of the vents in the truck.
Its a little hard to defrost the windows with air that cool coming out of the vents with the heat turned all the way up. At least they are less than half what the dealer wants through amazon.
I am going to start with the easiest 2, and worry about the third one later that will require a complete dash tear down to get to.
12-14-2012, 08:58 AM #2
good luck...Tim Walters (Curky)
Wrangler AT/S 265/70R17 - Trail-FX window vents - Husky fitted splash guards - Silver Star zXe - Leveling kit -
12-14-2012, 06:57 PM #3
Well for now you can use a Wagan Tech 12 Volt Defroster, $10 on sale at Cabelas
Just search for "defroster" in the search bar on their website.
By SurrealOne in forum How-to GuidesReplies: 2Last Post: 08-26-2012, 08:01 PM
By 97z71 in forum Chevy C/K Truck ForumReplies: 0Last Post: 07-23-2012, 02:57 AM
By bigbluesub in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 07-04-2012, 08:02 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 04-21-2011, 12:00 PM
By dugtipi in forum General Chevy & GM Tech QuestionsReplies: 7Last Post: 07-12-2010, 12:07 PM