Hello everyone! I have a 2002 Trailblazer EXT and my 3rd brake light has stopped working. The dealer told me that it is rarely the bulbs and it needs to be replaced for $500. I removed it and attempted to replace the bulbs but could get the cover off after I removed the screws.
Any suggestions? Do I just go ahead and get it replaced?
Thanks.
to the site. I would suggest posting something in the Audio, Video & Electrical section
Matt
1987 GMC Sierra Classic 5.7TBI



since you have the cover off replce the $1.50 bulb before paying that much for a third brake light... that is rediculous.... besides you have two more taillights and its only 50$ ticket if the cops actualy pull u over for it haha i know from experience.... however u will have to eventually get it fixed for inspection
PETE
95 GMC Sierra 2500
3" Body Lift, 33" Goodyear MTR's
5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
Sold :(
1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust
Contact this GMTC Moderator for any problems or questions you may have
Join the GMTC Facebook Group!!! Join Here



They are not regular bulbs like most people think, they used to be when they first started putting them in back in the 80’s.
Now they are LED’s in a sealed plastic housing. Sort of like the old sealed beam headlights were.
Here is a better price from LMC
Well the site is down this morning but the last time I looked the one for my 94 Burb was $100
If you think it is just one bulb you are sadly mistaken.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.



Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.



I admit I am sadly mistaken haha.... I must not have been thinkin that day or somethin hope you get it fixed for cheap!!!!
PETE
95 GMC Sierra 2500
3" Body Lift, 33" Goodyear MTR's
5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
Sold :(
1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust
Contact this GMTC Moderator for any problems or questions you may have
Join the GMTC Facebook Group!!! Join Here


don't worry pete you're not alone. I noticed mine was dead the other day and was sure it was just one bulb. I still have to check the fuses but it's just too damn cold.
Dan
1999 GMC Sierra 2500 350 vortec
1967 Jeep M725 ambulance 230 tornado
1990 Cherokee Limited- 3 inch lift on 33's
...and every one of em has issues
If you have any questions or problems don't hesitate to send me or any other GMTC moderators a PM
Bookmarks