GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3
  1. #1

    Default Shifting into 4W drive

    Need advice from you Chevy owners...
    the floor mounted shifter is kind of stiff shifting into 4WD.
    (I'm assuming you can shift on the fly ?)
    any trick with this, or just put some muscle in it ?

    Thanks

  2. #2

    Default

    What year truck? I suggest that you crawl under the truck and spray the shift linkage at the transfercase down with some PBlaster. It should make a world of difference? You can shift between 4wd high and 2wd while on the fly. For 4 low you usually need to be rolling under 5mph with the trans in neutral, then shift into 4 low or back to 2wd from 4 low. I would check your manual for your truck and see what it says about 4 low

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #3

    Default

    Thanks, will definitely have a look at that

Similar Threads

  1. converting 2 whel drive to 4 wheel drive
    By jdaugherty3 in forum GM Powertrain
    Replies: 15
    Last Post: 11-24-2013, 07:15 AM
  2. 4L60E problem. Strange shifting into drive. Coming out of OD.
    By freightshaker in forum GM Powertrain
    Replies: 5
    Last Post: 04-05-2012, 09:49 AM
  3. Replies: 0
    Last Post: 03-21-2012, 01:26 PM
  4. When shifting into reverse at higher idle can feel and hear loud 'CLANK' drive makes
    By BobEhud in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last Post: 09-21-2011, 03:17 PM
  5. Transfer Case Shifting Motor Not Shifting after Installation
    By derickheggie in forum General Chevy & GM Tech Questions
    Replies: 0
    Last Post: 01-30-2011, 10:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •