GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3
  1. #1

    Default 1996 GMC Sierra 5.0L Wont start?

    It's got a 135K on the motor up until Wednesday it was running strong as ever got in it Thursday morning it just turns over and over won't fire I have checked the fuel pressure (Cranking 63lbs) I've got good blue spark but the dam thing still won't fire up I've checked fuses but a pocket scan on it with no errors I am flat stumped why it just won't start any help would be appreciated

  2. #2


    I got issue same on 93 chevy 5.7 same motor different torque according to rescearch ignition control module is first then if it doesn't turn on on and u have power to both injectors it will be your ecm or pcm if it is gas w/o 4 speed automatic overdrive pcm gas or diesel w/4 speed automatic overdrive tcm normally diesel 6.5 motors yeah i had issue similiar replace fuel pump,filter,rebuild tbi kit fuel presure regulator,replace injectors,replace fuses, relay- most answer and results cap and rotor with icm= ecm
    15 years experience gm

  3. #3


    I think I have figured it out of all things I think it may be the ECT sensor I waited until it got warm today truck sat in the the sun all day and the dam thing fired right up

Similar Threads

  1. Help! 97 wont start
    By dbltap in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 11
    Last: 01-06-2013, 10:30 AM
  2. hard start or wont start 305.
    By timhall1787 in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 09-29-2011, 09:00 AM
  3. 91 wont start
    By uwireme in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 3
    Last: 08-09-2011, 09:43 AM
  4. 1992 4.3 sierra wont start unless gas petal to the floor
    By WorkTruck 4.3 in forum GM Powertrain
    Replies: 7
    Last: 08-05-2011, 10:49 PM
  5. Still wont start
    By Allmostsmart in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 6
    Last: 04-08-2010, 07:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts