GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default 2011 Silverado Reverse Wire Location?

    Hi guys

    I'm trying to hook up a single reverse light and the instructions call for tapping into the reverse wire - can somebody describe how I would locate it? Possibly the trailer harness?

    Thanks guys. Any help would be appreciated.

  2. #2

    Default

    Yes the Trailer harness. But you will need to use a relay so you don't overload the reverse circuit. I did this on my 96 Tahoe.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

Similar Threads

  1. Decent in-cab reverse circuit location for 99-06 OBS?
    By SurrealOne in forum GM Electrical Tech
    Replies: 6
    Last: 10-24-2011, 03:49 PM
  2. 1994 Suburban 5.7, Location of Timing Wire to Disconnect.
    By corvairdad in forum GM Powertrain
    Replies: 5
    Last: 06-17-2010, 08:17 PM
  3. amp wire location
    By agerangere5 in forum Audio, Video & Gadget Tech
    Replies: 3
    Last: 01-27-2010, 06:11 AM
  4. VSS and Back-Up Wire location 2004 Z-71 Silverado
    By crwdsm in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 3
    Last: 03-20-2009, 07:46 AM
  5. Reverse Sensor wire - 2001 Yukon
    By ChrisFSB in forum Audio, Video & Gadget Tech
    Replies: 0
    Last: 04-06-2008, 01:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •