Results 1 to 4 of 4
01-09-2013, 10:45 AM #1
- Join Date
- Jul 2011
2004 Silverado - HELP Replacing Driver side WINDOW REGULATOR
About 2 months ago my drivers side window (all of a sudden) stopped rolling down and there was a crunching sound when i pressed the down button.
I was doing research online and talked with a few people who told me it sounded like a window regulator needing replacement.
So i purchased a new window regulator with the motor online, I went to install it today and I had some trouble figuring out how to remove the original
regulator and motor.
Can anyone tell me how to remove and replace this regulator and put the window back in the new one.
My window will not roll down and I can't get it down manually.
Any info would be very appreciated.
01-09-2013, 11:14 AM #2
remove door panel
inspect bottom of window (from in side the door), see if you can access the bolts that pinch the class to the regulator
tape window to door frame so window wont fall and remove bolts from window
find the 4 or more bolts that hold the window regulator and motor to the door and remove
manipulate the regulator so it will lay parelle with the ground inside the door and remove through the opening.
installed in reverse order
with new regulator installed, "raise" the regualator using the window button untill it comes in contact with the glass and you can installed the two bolts
reinstalled door panel.
- - - Updated - - -
quick youtube search found me this:
seeings how your window wont move your going to have to do some figuring out for yourself on that one but it will be doable no doubt."i dont think you got the picture. i got a beautiful picture. this baby happens to have an extra turn of speed, which is the only thing i care about. you dont understnad what happens do you? they make cars. they make 'em exactly the same way. one or two of 'em turn out to be something special. nobody knows why. i know why. i may be kiddin' myself, but i think i can make somethin' out of that sad little bucket of bolts." ~ Tennessee Steinmetz
01-09-2013, 12:05 PM #3
This 1A Auto video is exactly how I replaced my window Regulator a couple months ago.... It really is easy...00 Chevy Tahoe LT, 5.3 4x4
01-11-2013, 12:02 AM #4
It really is pretty straight forward, though removing the door panel for the first time can be a bit intimidating. Just make sure you get all the screws off before popping the panel off. You might break a few clips, but those are not a big deal and easily replaceable. Good luck and have fun.'88 Jimmy 4X4
5.3l L59/ 4L60E Tuned by Tad
4" Lift 33" BFG. Custom Brush Guard, KCs, outside spare, Oil pan guard etc.
By swhite64 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 09-11-2012, 12:25 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 12-06-2011, 05:01 AM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 10-25-2011, 07:30 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 09-07-2011, 06:00 PM
By phoebeisis in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 06-04-2011, 07:49 AM
Tags for this Thread