Results 1 to 6 of 6
Thread: Another question about gears
01-15-2013, 10:57 PM #1
Another question about gears
Have an 02 z71
1900 RPM at 70mph
285/75r16 setup (32.8" tire)
Do I still have the stock 3.73's in there?
Sorry if its been answered before, did a few searches.
01-15-2013, 11:51 PM #2
Look on the inside of your glove box for the code list. If you have the GT4 code , its got 3.73 gears.
- - - Updated - - -
Look on the inside of your glove box for the code list. If you have the GT4 code , its got 3.73 gears.AL-
2003 SILVERADO 2500 HD
2001 SILVERADO 1500 Z71
01-15-2013, 11:56 PM #3
I know the codes, wanted to know what RPMs people have with bigger tires/gears.
And, if 1900RPM tells me that the previous owner left the gears stock after the lift and tires.
01-16-2013, 12:27 AM #4
01-16-2013, 12:35 AM #5
01-16-2013, 12:42 AM #6
You could also check East Coast Gear Supply. They happen to be local to me so I bought from them AND had them do the installation work since gear patterning isn't a skill I possess. I'm running Nitro gears based on the recommendation from ECGS. When I mentioned Yukon gears they had some not-so-good things to say about them.
As these guys do gear work regularly AND they warrant their work for 5 years, I believe they made their recommendation and comments based on solid experience. They were willing to put in any gears I wanted, by the way. (i.e. They pushed nothing on/at me and merely recommended a manufacturer based on my diff and the ratio I wanted.)
I dealt with Chase when there. I originally thought he was just a knowlegdeable sales person but it turned out he's the owner. It was refreshing to see an owner present in his shop. He drives a lifted Cherokee that rolls on 37's -- some insane work to push those puppies, so he's an enthusiast, too.
By Buckhunter11b in forum GM PowertrainReplies: 9Last Post: 03-16-2012, 11:46 AM
By DAREDEVIL in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-12-2010, 05:07 PM
By Winchester in forum Member IntroductionsReplies: 3Last Post: 11-28-2010, 12:35 AM
By phoebeisis in forum GM PowertrainReplies: 6Last Post: 12-14-2007, 12:12 PM
By D13TRY1N6 in forum Performance & FuelReplies: 4Last Post: 10-19-2007, 09:16 AM