Results 11 to 20 of 38
01-22-2013, 12:30 PM #11
I would say that it depends on what they are going to replace. Many small shops just replace parts and do not check for other components being in spec and do not have the capabilities to test the trans prior to install. The warranty seems good. But, some remanufactures require the fluid lines and cooler to be flushed or a new radiator installed or an inline filter to be installed for the warranty to be honored. Be sure that if they are not rebuilding it that they do what is necessary to have the warranty honored. I would call around. Also, call a gm dealer and ask how much a GM SERTA rebuild trans goes for. They are rebuilt by GM, all parts are removed and inspected/measured to be sure that they are with in specs, filled with fluid, and hooked up and tested at the factory before shipping and have all the recent updates. I just called GM and asked about a SERTA trans for my 05 yukon xl 4x4. The price is $1549. Most of the trans shops around me charge $500 labor to R&R a trans. Many of the GM dealers around me have started giving major price breaks on labor if you have one installed by them. They are usually within $100 of the local trans shops for the price of a rebuild. Then you know that the entire trans was gone through, rebuilt, updated, and bench tested. If you have the capability of pulling it yourself and having a "bench job" done it will save you a considerable amount of money.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
01-22-2013, 06:51 PM #12
well in the situation i am in with school starting tomorrow, I kind of have no choice. BUT...
I have heard nothing but good things about this place from friends and some businesses that recommend them, also their reviews seem to be very good as well.
also found out that they do include:(besides the full rebuild)
1)replacing the torque converter with a reman. one
2)they also will repair my rear main seal(which has leaked for years) for no labor charge except the price for the gasket
3) and they use full synthetic fluid
not to mention i did ask and find out they perform a full scale dynamometer test before reinstallation, so far everything seems pretty legit, not to mention they were very courteous as i walked into the door, unlike some other shops I have been to, they didnt make me feel like another number in line.
im getting this repaired at Greatstate transmission, if any of you are curious...2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
01-23-2013, 04:26 PM #13
Just letting you know so that's not a deciding point for the shop. I'm running a fully built tranny, with significant upgrades, and the best fluid for it? Dexron VI. ;)
As a counterpoint note, I spent right at $3K for a fully built transmission. I made the upgrades though, intentionally, as I have a 6.0L engine that will someday sport a Supercharger. I needed that sucker to be 600HP and 800+ ft/lbs torque compliant. On the flipside, I now NEVER am concerned about the transmission while towing my 9,900lbs 30ft travel trailer.
It's WAY more transmission than is required for a daily driver though...
Skip2006 Vortec Max 1500
-Custom Tune (389HP 440 Ft/lbs Trq - Dyno'd) | Volant CAI | Magnaflow Dual-in/out Exhaust w/3" stainless pipe tips | Fully Built Transmission w/ Red Eagle Clutches & Kolene Steels w/ Corvette Servos and Stage2 Shift Kit | 35K Tranny Cooler | Mobil 1 | Royal Purple Rear Diff
-Spray-in Bed Liner
-Premium Sound w/lifetime Satellite Radio | Leather | Sunroof | Heated Seats
-Limbstriping from USING the truck (those are badges of honor)
01-23-2013, 04:41 PM #14
I also am going to ask about them installing the corvette servos and see what there take is, as ive heard from some people some transmission shops have no problem putting them in as they are designed for the 4l60e's just in the corvettes, not the trucks, and ill see if it affects the warranty as well. (a $16.99 upgrade)
I have also heard talk of the transgo shift kit, but im still not set in stone, if that might be more than i need, because the last thing i want is to shorten the life of my transmission.
still researching LOTS!!! but i need to make a decision on those two in the next two days or so...
01-23-2013, 05:16 PM #15
Something you should be aware of though, is that the four speed tranmission has a really large gear gap between 1st and 2nd gears, meaning the difference in gearing is sufficient that with a Corvette servo installed, you'll find that the 1 to 2 shift is definitely more pronounced. It'll jolt ya forward a bit. I love it... but had to seriously soften the shifts once the shift kit was installed (see below).
in short, the good news is that servos a shift kit that aren't overpowering your other components (causing mechanical jarring that breaks things in the transmission... which is why upgrades of clutches and other items often help) is going to increase the life of your tranny due to temperature reductions.
That being said, do your transmission a gigantic favor and install an aftermarket transmission cooler. These will connect to your transmission lines, and will do two things. 1) add additional fluid capacity, and 2) decrease the operating temperature of your transmission. Both result in lowered temps. For about $40 you can add 50% or better to the life of your transmission. Cheap cheap cheap insurance. And they take about 30 minutes to install.
Also, make sure, as you service your new transmission in the future that you replace the filter, not just do fluid exchanges. 100% flushes are great, but they help much when the filter gets clogged...
01-25-2013, 11:31 AM #16
well damn, thanks for every single bit of that information!
I decided to do the servo swap, but opted not for the transgo shift kit...
hopefully i should still be able to notice the difference.
I dont want neck snapping shifts, but i do appreciate solid, firm shifts, seeing my girlfriend drives a nissan sentra with that horrible continuously variable transmission that has NO shift whatsoever! i hate that car to death!
and as for transmission cooler, i will add one for sure and buy the escalade cluster as well to monitor the temp
01-25-2013, 11:44 AM #17
Are you sure that the escalade cluster is "plug n play" as far as the temp sensor goes? I know that @SurrealOne added a stepper motor to his cluster and it did not work. He was trying to find a competent tech with a tech II to make it work. Let us know if it works. I am interested in a trans temp gauge also. Those continuously variable transmissions are weird. A few years back we test drove a mini cooper with one. It was like driving a GoCart
01-25-2013, 11:57 AM #18
our clusters ARE prewired for the transmission temperature sensor, and I WOULD go that route because I am competent with my soldering skills. but as I have learned, in order to make the trans. temperature gauge work, you will have to have your cluster reprogrammed after adding the stepper motor assembly, which ruins the whole idea of doing it myself personally.
and after you risk not aligning the needles back up perfectly AND buying a new face for the cluster AND paying to have it programmed, you already close enough in budget to have bought an escalade cluster with way less of the hassle and it has a nice look to it as well, nothing to crazy and stupid but a nice clean look, and with the trans gauge it comes with (it works plug 'n' play) you also now have updated from a 100 mph speedo to a 120 mph speedo, which works as well!
im looking at one on ebay right now for $250.00, which is about as low as they get.
CVT is unsafe i hate it, when you need to step on the gas to avoid something sudden, it doesnt respond, it takes its sweet, soft, friendly time to gradually increase the rpm according to how much force you applied to the gas pedal, so as to not even knock over a glass of water on your dash, by that time you already got T-boned lol
01-25-2013, 12:19 PM #19
I looked around and found one for $240 and they program it with your proper mileage.
01-25-2013, 12:33 PM #20
By brentsmith36 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 01-17-2012, 10:12 AM
By StoneCold in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 02-17-2011, 07:46 AM
By dizzy17 in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-10-2009, 10:43 PM
By jasonsz71 in forum GM PowertrainReplies: 2Last Post: 04-05-2008, 12:20 PM
By peterK in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 8Last Post: 04-18-2005, 05:13 PM