GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 15
  1. #1

    Default 2008 GMC 2500HD interior door handle mecanism

    HI all,

    I have a 2008 GMC Sierra 2500HD SLE ext cab 6.0 4x4. just the other day something broke in the interior door handle mecanism...door will not open with internal handle but work good with outside handle.

    So I removed the internal door panel to find a broken metal part holding the the ball at the end of the wire cable going to the latch/opener module. Went my local GM dealer and was told that I need to replace to complete internal door panel at almost 800$.
    *&?*(* for just a small white metal POS.

    Has anyone encountered this problem before.

    1- Are there any third party parts suppliers where I can get this part. The internal handle assembly is glued to panel but it would be an easy job to replace if the part was available.

    I might have to search with auto salvage suppliers to get a used panel. Even if it is not the same color panel I would remove the internal door assembly and reglue to my existing panel.

    Can anyone direct me to any parts dealers where I could order this part.

    Thanks

  2. #2

    Default

    Do you have any pics? From what i have seen on 08's either the handle is above or below the switches but either way i dont think you need a panel but maybe a hadle
    01' 1500 LT Z71 ECSB 5.3L
    line-x'd front brush guard with KC Daylighters, 6000k HID lows and highs, rewired highbeams, Trans-go mild shift kit, custom stainless duals, 3500 dually OEM taillights, K&N CAI. Still have OEM fender flairs and leveling kit in boxes waiting for time.


  3. #3

    Default

    id try a salvage yard and see if you can get just the part you need.

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

  4. #4

    Default

    Well had time today to look at it and decided to try to repair by rebuilding the part with epoxy. If successful I will post photos of what I've done.

  5. #5
    Jr. Engineer
    Join Date
    Aug 2010
    Location
    eas' bum fuk, maine
    Posts
    207

    Default

    iv done many inside door handles at work and none of them resulted in replacing the panel.
    "i dont think you got the picture. i got a beautiful picture. this baby happens to have an extra turn of speed, which is the only thing i care about. you dont understnad what happens do you? they make cars. they make 'em exactly the same way. one or two of 'em turn out to be something special. nobody knows why. i know why. i may be kiddin' myself, but i think i can make somethin' out of that sad little bucket of bolts." ~ Tennessee Steinmetz

  6. #6
    Legend


    Enkeiavalanche's Avatar
    Join Date
    Apr 2010
    Location
    Piermont,NY, back in Northern NJ now, But may be in IL soon....
    Posts
    5,353

    Default

    Please post pics of the Plastic part THAT GM should have used metal....
    08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X

  7. #7

    Default

    I used some steel wire to fix my tailgate because a part fell out.... Still works to this day after a year and a half of use.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

  8. #8

    Default

    Well the epoxy I have did not bonded at all with the white metal. So I guess my option will be to the auto salvage.

  9. #9

    Default

    I dont understand how a broken door handle needs a new door panel? Also not sure what broke off, we need some pics here.

  10. #10

    Default

    Yes a little clip. Salvage yard and just look for one that would do the job if they don't have a salvaged NBS.
    I used a tie wrap to get me through until I replaced one.

    Did you try Canadian Tire in their HELP Packs?
    Finally a signature and Avatar! I also posted some pics in the Gallery.
    2011 2500HD Crew Cab 4X4 Z71 6Liter.
    2011 Outback Travel Trailer 260FL
    So Happy to not be on the edge of GVWR Over Load!!

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. DOOR HANDLE chevrolet SILVERADO 1500 07-09 08 2008 part
    By ChevyFan in forum Chevy Parts eBay
    Replies: 0
    Last: 09-10-2010, 02:50 PM
  2. DOOR HANDLE chevrolet SILVERADO 1500 07-09 08 2008 part
    By ChevyFan in forum Chevy Parts eBay
    Replies: 0
    Last: 07-28-2010, 06:00 PM
  3. DOOR HANDLE chevrolet SILVERADO 1500 07-09 08 2008 part
    By ChevyFan in forum Chevy Parts eBay
    Replies: 0
    Last: 12-28-2009, 09:30 PM
  4. interior door handle not working - 99 Suburban
    By Castor Troy in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 7
    Last: 03-10-2009, 10:57 AM
  5. My driver side interior door handle broke!!!
    By 22inchbigroller in forum Chevy C/K Truck Forum
    Replies: 2
    Last: 06-21-2008, 10:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •