Results 11 to 20 of 47
Thread: need help running wire
01-20-2013, 04:54 PM #11
Make your relay triggered by your brights trigger and then you can mount the switch wherever and be done with it. Switches are dumb lol
01-20-2013, 05:23 PM #12
Will it fit right next to the stabilitrac button ? I find that little cubby is useless. May be get a wrecked NBS that has all those buttons, and you can re-purpose them as you want??? This would not make it stand out.
What about the old school floor switch that was used to dim high beams? Then your left foot will have a purpose! Yes a little modification will be required to the included wire harness. May need some regular cleaning as you are in snow country!!!Finally a signature and Avatar! I also posted some pics in the Gallery.
2011 2500HD Crew Cab 4X4 Z71 6Liter.
2011 Outback Travel Trailer 260FL
So Happy to not be on the edge of GVWR Over Load!!
01-20-2013, 05:50 PM #13
If at first you don't succeed, get a bigger cheater bar.
1999 GMC Sierra SLT Z71 | 5.3 "Vortec" | Spectre "Cold Air Intake" | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tail Lights | Denali headlights | Grill Mounted Fog Lights | AWS Bug Shield | 265/70/16 Futura Scramblers | Boss HD Speakers | 2005 Overhead Console | Flowmaster Super 40 mufflers 2N1O | Mostly stock-ish
Bigger Amp Alternator | Electric Fans | Transmission Fluid cooler | Paint (Halfway there)| Interior Restoration/Upgrade with newer model parts | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations (68% Done) | And whatever is spurr of the moment
CVN-69 "IKE-ATRAZ" AIR/V-2 Gear Dawgs
01-20-2013, 08:21 PM #14
Fabtech/Banks Ram Air |Fuel Off Road/ 315/70/17 duratracs |Hyper tech / Spencershids |Color Matched Bowtie |15% Tint on Front Windows|20% Tint on Back Windows
Chevy Ridin' High
"Black rims are as cool as a boner at a swim meet"
01-20-2013, 10:00 PM #15
Instead of triggering your relay with a constant hot wire or a parking light or ignition trigger, trigger it with the high beam wire.
01-20-2013, 10:02 PM #16
When you're looking at the pins of a relay it would go like this
Pin 87 gets constant 12v
Pin 85 gets the high beam circuit wire
Pin 86 goes to ground
Pin 30 goes to your light bar
If you still want it switched, then you run pin 30 to one side of a switch and the other side of the switch to the light bar.
If you want it switched with a switch that has a little light indicator, also known as a pilot switch, then you do the same with the above switch but there will also be another pin on the switch that will need grounded.
01-20-2013, 10:06 PM #17
Oh yea, what that allows the lights to do is:
When the switch is on, the lights will ONLY come on when your high beams are on, as soon as you click the high beams off, your light bar will follow suit. This keeps you from bobbling around with two different functions to shut down all your lights.
If you don't want your light bar to come on at all, simply shut off your switch and they will not react to your high beams coming on or off.
Your high beam circuit will work normally at all times and in no way will it be affected by your new setup.
01-21-2013, 09:35 AM #18
the only problem having it hook up to my high beams is the light is for offroad and show only your not allowed to have it on going down the highway
01-21-2013, 09:38 AM #19
That's why you would turn the switch off when you don't need it.
And lets say for example you are on a long trip on a main road, it's dark as crap out and you're the only one cruisin down the road, you're telling me that you aren't gonna flip that bad boy on? Waste of money if you don't.
You can also install a 3-way switch. This would allow you to give your lights TWO triggers. A high beam trigger and an accessory trigger. What this will do is allow the following light options
Light bar on with the accessories on
Light bar on with the high beams on (you would select between the two with a single switch!)
Light bar off completely (this would happen if the switch was in the neutral position.
01-21-2013, 06:08 PM #20
ya ok i might turn it once in awhile for that. now that is an option running a 3 way switch
By Newfie_Darren in forum Chevy Truck Talk & GM NewsReplies: 2Last: 07-03-2012, 04:13 PM
By Schmig in forum Audio, Video & Gadget TechReplies: 4Last: 01-12-2010, 04:27 AM
By trapper_canada in forum Audio, Video & Gadget TechReplies: 4Last: 10-29-2009, 12:15 AM
By L0sts0ul in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last: 06-26-2009, 10:30 PM
By collinsperformance in forum General Chevy & GM Tech QuestionsReplies: 5Last: 10-06-2008, 01:10 PM
Tags for this Thread