Results 1 to 6 of 6
Thread: block heater on 03 5.3
01-21-2013, 09:19 PM #1
- Join Date
- Mar 2010
block heater on 03 5.3
Since I need a new water pump as well as a engine block core plug, that just happens to be the one for the oem location of the block heater im thinking of installing one. I've been doing some research and I've come to understand that the 99-04 iron block trucks are able to have a block heater non thermostat style installed and not throw a check engine code while being used when the ambient temperature is 1° to 32°. Now all the 05 and up aluminum block motors are not capable of this as I understand. I need an answer from someone who has experience with this. I do not want to go through this and have a useless block heater until it is 0° literally outside.
01-24-2013, 11:33 AM #2
- - - Updated - - -
I did a little research, the cord that comes with the model for the 05 is has a thermostat in it and will only turn on at 0 degrees. You could easily fix that issue by purchasing a replacement non thermostatically controlled cord from a place like napa or buy an aftermarket heater that has a thermostat setting to turn on at 32
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
01-24-2013, 01:13 PM #3
- Join Date
- Mar 2010
the pcm recogonises that the ect is too warm in comparison to the ambient temperature sot it will throw code P0116. gm does this for somethig with the emissions so the motor is more efficient at cold start up on a 0* or below day. i was looking in other forums and people said that they cut the thermostat off the plug so they could use it any time they wanted but those were all 05 and up models with the aluminum block. they said it threw the code. im just wondering if anyone has ever put a heater in on a 99-03 motor? and what results they had?
01-24-2013, 01:17 PM #4
Curious question. Why do you need a block heater? Typically, they're installed to keep oil flowing during extreme cold conditions (like below -10F to -20F). With 5w30 oil having a pour point of -42C (-43.6F), the block heater certainly isn't going to provide much value to you between the 1 and 32F (-17C and 0C) range. The oil may be thicker, but it most certainly will circulate through your engine just fine.
Block heaters don't keep the engine block at an operating temperature, either, and with the massive power draw they pull (1200watts or more), they're certainly not economical, in terms of keeping your engine warm, vs. warming it up for 2 minutes before you get in.
For my own education why would a person need a block heater for those "just cold" ranges?
-Skip2006 Vortec Max 1500
-Custom Tune (389HP 440 Ft/lbs Trq - Dyno'd) | Volant CAI | Magnaflow Dual-in/out Exhaust w/3" stainless pipe tips | Fully Built Transmission w/ Red Eagle Clutches & Kolene Steels w/ Corvette Servos and Stage2 Shift Kit | 35K Tranny Cooler | Mobil 1 | Royal Purple Rear Diff
-Spray-in Bed Liner
-Premium Sound w/lifetime Satellite Radio | Leather | Sunroof | Heated Seats
-Limbstriping from USING the truck (those are badges of honor)
01-24-2013, 04:15 PM #5
- Join Date
- Mar 2010
01-29-2013, 09:00 AM #6
Block heaters are awesome if you live in cold places, cold!!! Place lol. Up here in Alaska we have them in Fairbanks on all our vehicles. If you don't have one and it gets -40, your truck is not going to start. But even 300 miles south of us in anchorage, they don't have block heaters in most vehicles. I wouldn't waste the time or money and I wouldn't wanna pay the electrical unless I had to. I only plug my truck in when I HAVE to.
By drwdominance in forum GM Diesel & DuraMaxReplies: 15Last Post: 01-09-2012, 07:00 PM
By chvytrck in forum Chevy Truck Tech ForumReplies: 1Last Post: 12-14-2011, 06:04 AM
By nephyrias in forum Chevy C/K Truck ForumReplies: 0Last Post: 11-23-2010, 09:54 PM
By dgfal in forum GM PowertrainReplies: 3Last Post: 10-30-2008, 11:01 AM
By ss_silverado_phoneix99325 in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last Post: 12-04-2007, 05:40 PM
Tags for this Thread