Results 21 to 30 of 38
Thread: Good Looking Interior Lighting
02-07-2013, 06:55 PM #21
My truck is the exact same as an avalanche, I'm fully loaded, heated seats etc. did em all. I removed the tint on the buttons and with the cluster I just overlayed an aftermarket gauge cover (Cadillac version). Everything else was a swob and alcohol. Along with some adhesive remover solution.
02-07-2013, 07:18 PM #22
You did the same with the window controls as well?
1996 Chevy Tahoe LT 5.7L V8 4X4 202,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
02-07-2013, 08:19 PM #23
Yep! Spoiler alert though, the heated seat switches are very shallow, so shallow that even a rivet style LED was too big so I had to drill a hole big enough for the rivet LED and actually attach the LED through the back part of the housing. Next time my door is off I'll take a pic, that particular switch lost its factory look when pulled out...
02-07-2013, 09:29 PM #24
Well I wont have to worry about that my 96' doesn't have heated seats.
02-07-2013, 09:33 PM #25
02-07-2013, 09:57 PM #26
02-08-2013, 12:18 AM #27
Wow, that ended up being a long post... bottom line though is that it's pretty easy to take the upholstery off and put it back together nicely on these trucks, so I expect mine to be done and functional this weekend (with a temporary switch panel. The custom one to replace the rear radio controls will take some time like the one for my overhead console did.)
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
02-08-2013, 12:45 AM #28
Mind PM'ing me some details/thoughts soas to avoid derailing this thread any more than we already have? I'm interested in your thoughts as to how to go about heating the rear bench seat of a NBS extended cab like my own. The fact that the back and the rear bench, itself, are separate pieces means heating the back and bottom of the seat could pose an interesting challenge. I'm also curious what you tapped for power and the amperages involved.
02-08-2013, 01:18 AM #29
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
02-08-2013, 01:43 AM #30
By wisoutlaw in forum Chevy C/K Truck ForumReplies: 1Last Post: 08-04-2011, 03:12 PM
By skhurst18 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 06-12-2011, 05:31 AM
By DTACA Burban in forum Lighting DiscussionReplies: 4Last Post: 09-25-2010, 08:22 AM
By Dan-O in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last Post: 08-21-2010, 07:42 PM
By Boreal in forum Chevy C/K Truck ForumReplies: 2Last Post: 06-15-2009, 10:05 PM