Results 1 to 1 of 1
02-02-2013, 11:10 PM #1
- Join Date
- Feb 2013
2004 GMC Sierra Instrument cluster repair...made a mistake, need help!
I took out my instrument cluster and took it apart to replace the stepper motors. I dialed back the needles until they stopped and removed them.
I forgot to mark an index point where the needles stop after turning them back counter clockwise before i pulled them all off.
Is there a way to put the needles back on or re calibrate them back to zero without messing everything up?
I have not removed the old stepper motors, they are just missing the needles and turned counter clockwise untill they stoped. I just stopped everything once i pulled the needles off.
By parts bot in forum Chevy Parts eBayReplies: 0Last: 01-06-2013, 04:10 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 09-10-2012, 05:20 AM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 09-06-2012, 05:10 PM
By Onstarnut in forum General Chevy & GM Tech QuestionsReplies: 0Last: 02-15-2010, 08:36 AM
By state guy in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last: 06-16-2009, 02:25 AM
Tags for this Thread