GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11

    Default

    it depends on where the line is running. If it is a straight line or has bends. You can buy a tube bender cheap. But, I had to drop the gas tank on my 95 to change a line. I could be any of the lines.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  2. #12

    Default

    well........i hope it is easy then

  3. #13

    Default

    Since it is leaking this is not a big issue but, a flush of the brake lines would be helpfull also.
    To answer your question about tools you can use regular wrenchs on the fittings. However the "correct" tool would be to use line wrenchs. They almost look like open end wrenchs, but the difference is the open part isn't as large as the regular open end wrench.





    2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18

  4. #14

    Default

    Quote Originally Posted by aloxdaddy99 View Post
    Since it is leaking this is not a big issue but, a flush of the brake lines would be helpfull also.
    To answer your question about tools you can use regular wrenchs on the fittings. However the "correct" tool would be to use line wrenchs. They almost look like open end wrenchs, but the difference is the open part isn't as large as the regular open end wrench.

    Thanks for the info. I did not know there were such things. I may look into a set.

    - - - Updated - - -

    Was under the truck for a little bit yesterday trying to figure out how to replace gas tank straps. One broke off the other day only to realize that the previous owner had a ratchet strap holding that part of the tank up. Grrr.......so I will be fixing the breaks this weekend and replacing the rusted/broken gas tank straps (and getting rid of the ratchet strap).




    Does the end that does not get bolted in just slide into the slot on the truck?


    It seems the more I dig the more little issues I find....oh well, the joys of buying an older truck.

  5. #15

    Default

    So finally got to fixing the truck this past weekend. The Front brake line that runs to the pass side was rusted out. Replaced that and bled the brakes. I still need to bleed the brakes again, but I have more pedal than I did before. Also, replaced one tank strap, becasue there was a ratched strap in its place when I bought the truck. I could get the other strap out because one on the break lines was wedged between the frame and the tank so it wouldnt let the strap down. Its not rusted, but figured I would replace it while i was under the truck. All I need now is a factory exhaust and the major issues will be taken care of.


    Anybody want to trade me their factory exhaust + cash for my dual set up?
    If you think you can do a thing or think you can't do a thing, you're right.--Henry Ford

Page 2 of 2 FirstFirst 12

Similar Threads

  1. header questions? and other exhaust intake and tune questions?
    By elkosp16 in forum Performance & Fuel
    Replies: 16
    Last Post: 07-19-2010, 04:56 AM
  2. First time towing questions.. Tire psi/Air-bag questions
    By beforeiforget761 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 2
    Last Post: 05-16-2010, 07:39 PM
  3. newb to the site, with questions
    By vensus22 in forum Member Introductions
    Replies: 10
    Last Post: 01-10-2010, 10:11 PM
  4. newb questions
    By Z28Johnny in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 3
    Last Post: 05-20-2009, 05:26 PM
  5. Newb from PA
    By Purestang in forum Member Introductions
    Replies: 14
    Last Post: 12-26-2008, 03:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •