i have a 2006 vortec max 1500 4 X 4. while im driving the service 4wd will display. will not go into 4wd, but if i stop and turn off truck. start truck back up, then it will go into any 4wd mode. but again after driving a while will all repeat again. if i could please get some help. wondering if it might be a bad relay or somethin. thanks..
SOP when the service 4wd light comes on is to hook it up to a diagnostic computer and see what fault the 4wd computer is seeing and diagnose from there. Without that step, we'd just be guessing what it might be.
I don't know if the '06 still had the same problem, but it seems that my vintage had issues with the switch, and a lot of people "guess" that the switch is bad and replace it and go on.
'98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
'92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
"My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World
Bookmarks