Results 1 to 7 of 7
Thread: Am I stingy?
02-07-2013, 10:34 PM #1
Am I stingy?
Or is $3000 ridiculous for ring and pinion swap? Asked my shop for a quote and they outsource axle work, one shop told them 2600 and another 3100 for parts and labor.
I smirked and said thanks anyways...
02-07-2013, 11:06 PM #2
I had my 4x4 regeared for a bit over $1500 -- including all parts and labor. All work was done in one day (I dropped off in the morning and picked up in the afternon) ... and everything is warranted for 5 years as long as break-in procedures were followed and a diff fluid change was done at 400mi (which I had the same shop do for me, just to remove any doubt).
$3000. Wow, just wow...
02-07-2013, 11:13 PM #3
Yeah... "wow" is all I could say too. Not sure what it is out here, but mechanics seem to be very expensive in Colorado. The shop I use is pretty reasonable, and they have a race team so thats cool.
I am a little disappointed though that they dont do axle work and the best deal they could find is $2600.
02-08-2013, 12:41 AM #4
There must be some major markup on their part. I regeared an 1995 silverado. It cost me around $1500. That was new gears front and rear and a new Detroit locker for the rear, all bearings, seals and labor included. I also dropped mine off in the morning and picked it up that afternoon. Check a phone book or google search rearend or ring and pinion shops near your home. You will save some money going directly to them. They guy I use charges around $300 to tear down a rearend and rebuild it and around $400 for a front diff. For $3000 you can drive to Michigan, use my guy, and hit the Casino with the cash you have left over! Weekend road trip??
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
02-08-2013, 01:41 AM #5
Try buying a lift ticket in Aspen. Yeah, some things in Colorado are expensive.1994 Chevy K2500 Silverado, 454 (modified), original owner.
And other vehicles and toys.
"...If you can meet with triumph and disaster
And treat those two imposters just the same;
...you'll be a Man, my son!" Rudyard Kipling
02-08-2013, 11:03 AM #6
02-08-2013, 12:52 PM #7David
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2001 Pontiac Sunfire
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
Tags for this Thread