Results 1 to 2 of 2
02-09-2013, 02:54 PM #1
- Join Date
- Feb 2013
vacuum, transfer case axle or 4x4 problem
New member here guys have been reading topics on here for years. As I know just enough to be danderous I never posted a answer cause I wouldn,t trust myself.
So heres the problem 99 Sonoma highrider 4.3 liter. Put the truck in 4wd a couple months ago to go for a ride on beach. Truck seemed to go in and out smoothly. On way home from beach pulled over for what sounded & felt like a flat while slowing down noticed it was underneath truck. possible transfer case or axle felt like it was trying to engage. Got home found a couple small holes in vacuum line replaced all of them. Problem still there. Replaced vacuum switch on transfer case no oil in lines problem still there. noticed if I undo vac hose to the vac resivor no more grinding sound from axle transfer case area. Push button 4wd shifter on dash shifts no problems can here motor shifting it and no trouble lights.
Anyway I have read alot of the the other topics on here about vac issues and could not find that directly dealt with this. Any advice would be appreciated. Thanks
Also with vacuum resivor unpluged I loss my defroster and floor heat and really need to get this fixed as that is the way I am currently driving this.
Last edited by Pikey; 04-16-2013 at 09:56 PM. Reason: Removed links to another forum
By Lil_Red_Chevy in forum GM PowertrainReplies: 4Last Post: 03-09-2011, 11:55 PM
By pkbell in forum GM PowertrainReplies: 1Last Post: 09-12-2010, 03:25 PM
By 09Z71 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 08-28-2010, 03:03 PM
By freightshaker in forum GM PowertrainReplies: 8Last Post: 03-31-2010, 02:37 PM
By Roy Lentz in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last Post: 02-07-2007, 10:37 PM