Results 1 to 3 of 3
Thread: What is trouble code 36
02-17-2013, 02:24 PM #1
- Join Date
- Feb 2013
- orange county california
What is trouble code 36
i have a 1994 gmc 2500 hd with a 454 in it and the service engine soon light is on and it shows a code 36 what does it mean
02-18-2013, 10:25 AM #2
the obdI code 36 is MAF Burn-off circuit. I first would clean the maf sensor wires with CRC MAF cleaner just spray alittle do not touch the small sensor wires. clean the air ducts and If a oiled air filter is used make sure that you did not oil it too much.
if after resetting the computer/ecm the code comes back then it will be the maf relays.
02-19-2013, 05:39 PM #3
- Join Date
- Mar 2012
36 ignition system circuit error. No MAF on TBI engines.
Last edited by redvett; 02-19-2013 at 06:01 PM.
By meash20 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 05-19-2010, 04:38 PM
By snascar29 in forum Chevy Colorado Forum (GMC Canyon)Replies: 1Last Post: 12-10-2009, 07:38 PM
By challutz in forum Chevy C/K Truck ForumReplies: 2Last Post: 11-21-2009, 08:37 AM
By T1743 in forum GM Diesel & DuraMaxReplies: 1Last Post: 11-21-2009, 03:11 AM
By johna20376 in forum Performance & FuelReplies: 2Last Post: 05-26-2009, 01:50 PM