Results 1 to 10 of 25
02-19-2013, 08:16 PM #1
Tonight my heater smells like antifreeze and now it blows out a white mist. The mist smells and leaves a film on the windows that will not come off easily. It will not defrost the window so now I can't see anything. This is unsafe to drive and our van is broken right now so it can not be driven. I need help please!!!!!!!!!!If you think you can do a thing or think you can't do a thing, you're right.--Henry Ford
02-20-2013, 01:12 AM #2
2013 Silverado LTZ White Diamond Crew Cab
Advent OGM1 Navigation
Husky Liners GearBox Underseat Storage
EGR Rail Caps
K&N Air Filter
Flowsound 40 Muffler
Hypertech Max Energy Tune (only top end limiter removed and AFM disabled)
Chrome Tailgate Handle Cover
TonnoPro HF-155 Tonneau Cover
WeatherTech Front and Rear Splash Guards
Husky Liners X-Act Contour Floor Liners
WeatherTech Side Window Deflectors
02-20-2013, 09:22 AM #3
it's a 99. after Googling for hours last night and talking to a few people today, it does sound like the heater core crapped itself. Where is it located? Under the dash?
- - - Updated - - -
Is $350-$450 a good price on having the core changed out by my local machanic?
02-20-2013, 10:05 AM #4
02-20-2013, 10:10 AM #5
I watched that already. I'm just going to have it done. Going to bypass the core so I can run the truck without it leaking.
02-20-2013, 10:13 AM #6
02-20-2013, 10:30 AM #7
I ddin't watch it until this morning at work. It appears to labor intensive for me to attempt. I hate spending that kind of money on labor since the part is only $61. I would rather it be done right then me screw something up in the process.
02-20-2013, 12:06 PM #8
with the dash to be removed to do this I would say 400.oo is a good price. bypass the heater core by connecting the 2 hoses together. they have fittings at the auto part stores for this.
what type coolant do you use ? dexcool gm approved or compatibles coolant ?
02-20-2013, 12:13 PM #9
- Join Date
- Nov 2012
- Akron, Co
Sounds like you need to make friends with a good mechanic that always helps out on the price lol.
02-20-2013, 12:21 PM #10
If you are looking at the engine, the coolant line on the left going into the firewall can be disconnected and re-connected back into the block by disconnecting the line on the right from the block, correct?
Tags for this Thread