GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1

    Default 4x6 Dead Tandem Project

    I've been running it through my head for awhile and I'm seriously debating turning my current truck into something that ain't seen very much. I'm a structural welder at where I work at. And I've been wanting to rig out for some time. But don't feel like paying over 15 grand for a used 1 ton flat bed truck to turn into a rig welder. I currently have a 4 inch lifted 94 K1500 chevy truck with a 5 speed, ext cab short bed. The bed is already shot and in need of complete replacing. Well I was thinking. What if I remove the bed, add about 3 foot to the frame *make it about equivalent with a LWB bed* and weld a second axle behind the first. Throw a 14 foot flat bed on it and put a new venture, or M3 granny 5 speed into it. It'd be a dead tandem 4x6. I already have all the tires. Got 3 left over from my last set that I use as spares *damn things to expensive just to get rid of* Maybe use 3/4 ton rear ends? I'm definatly going for 3/4 ton or 1 ton leaf springs and shocks. I figured if I placed the goose hitch on the bed equal between the two axles it would evenly distribute the load. Granted I could redneck all of this for about 5 grand or less instead of blowing 15 on another truck. Plus it'd be a head turning, and would look like one hell of a welding rig. Me and my gramps did this on a 1 ton before, but we moved the rear axle all the way to the end of the frame so it only touched ground when it was loaded with a goose neck. I want all 6 tires rolling all the time though. Thoughts? Input?
    94 Chevrolet K1500 4x4. 5.7L 350, 5-speed (AKA Betty) Or Rust Bucket...depends on if I'm mad at her.

  2. #2

    Default

    Guess not lol.

  3. #3

    Default

    That would be sick I wish our welding rig was like that its an old 3500 it could use alil more bed space. What axles you thinking about?
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

  4. #4

    Default

    Flaw is the 1500 frame isn't as tough as a 3500 frame....

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

  5. #5

    Default

    Is your added axle gonna be live or a drag axle?
    Axle choice will be a big concern since their arent many available that have an output drive, you cant mix axles very easy, they have to run ratios real close and have an equal final drive even if you run open diffs.
    A stronger T case will probably be needed too, I dont think the T case will live long in front of 2 axles, it's not built to take that kind of abuse.

    The frame should be easy to strengthen and lengthen, plating the inside will help a lot, I'd probably chop the existing frame just at the begining of the downward slope of the rear part of the frame, this way the added portion could remain level and make it easier to choose springs. You'll need to carefully figure spring rates so the truck isnt over sprung and bounce around like an over inflated ball when un-loaded.

  6. #6

    Default

    I was planning on using 3/4 ton rear axles and putting 3/4 ton hubs on the front. I didn't want to make it a dually cause I wanted to keep my big mud tires on it. Keep it looking redneck. Me and my grandfather built a wrecker truck using a 73 grummin fire truck frame before. Has a 8 lug dana 80 rear end with a heavy duty 5 lug front end *the stud pattern is made to fit rims for a dually so unless you actually looked at the lugs, you wouldn't notice just 5) Well in that wrecker we have a 5.9 cummins off a 92 3/4 ton, a 95 chevy Granny 5 speed, I believe it's a M3. Has a dodge input shaft so it'll fit to the cummins. I loved that truck, it's got so much power. You have to shift a like 2 MPH if you're in (L). So I was considering gonna with a Dana rear end at least on the front rear. And it's gonna be drag, called a dead tandem when the 2nd doesn't transmit power. Was tossing the idea of add plate to the inside of the frame for extra strength. A few cross over bars for some support. I have a 14 foot flat bed sitting at my gramps house that I had no idea what to do with. It's gonna be more for looks really than any major hauling. I doubt I'd pull anything bigger than a 30 foot goose and probably rarely, . I like having a unique ride. As for spring rate in the back end. I'm lazy, so a counter weight will probably be used or something like that. Like I said, it's mostly gonna be for show other than carrying my welder. So doesn't need to really be made for towing. Just a Redneck Half a Duce

    - - - Updated - - -

    Click image for larger version. 

Name:	487333_593247797369740_1739578837_n.jpg 
Views:	73 
Size:	31.5 KB 
ID:	49932 Will look like this *not that big though. Sticking with the same over all size. 4 inch lift, 33 inch tires. But this is a rough guess of what I'm after.

  7. #7

    Default

    if i could recomend something, look at a old military CUCV truck. its a 1 1/4 ton truck with dana 60 axles. keep the frame and axles and toss the rest. you can pick a one of these up for 1000-2000 easy. running condition even.

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

  8. #8

    Default

    Quote Originally Posted by Sierraowner5.3 View Post
    if i could recomend something, look at a old military CUCV truck. its a 1 1/4 ton truck with dana 60 axles. keep the frame and axles and toss the rest. you can pick a one of these up for 1000-2000 easy. running condition even.

    Alex
    Eh, I'm trying to avoid buying another truck though. Even if I could find one of those trucks it'd probably cost me quite a bit. This way, I can just get it a piece at a time and slowly build it as I can afford it. I can get axles for about 500 a piece from my gramps. He runs a junk yard and he's always building on some Chevy and has more parts than most Pick and Pulls have. I'm by no means rich. 2000 is quite a bit of cash to me. Gonna be one of them 12-18 month projects. Couple hundred here and their. Got a new born, sole provider for the family and all. The little wifey looks down on me spending my check lol. Gotta take care of them bills first.

Similar Threads

  1. Project Car to go with the Project truck/SUV?
    By Drake_korthos in forum Other GM Cars
    Replies: 0
    Last Post: 04-27-2012, 01:28 PM
  2. 1997 chevrolet c8500 tandem axle dump truck *we export*
    By Steve in forum Chevy Trucks For Sale eBay
    Replies: 0
    Last Post: 09-14-2010, 06:00 PM
  3. My DRL's are dead
    By Mean_Green_95 in forum GM Electrical Tech
    Replies: 18
    Last Post: 01-12-2010, 11:27 AM
  4. Motor dead :(
    By Demick in forum GM Powertrain
    Replies: 7
    Last Post: 05-23-2009, 12:01 PM
  5. Dead A/C
    By ct9a in forum General Chevy & GM Tech Questions
    Replies: 12
    Last Post: 08-06-2008, 10:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •